This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Out of the bottom. drop the entire K-member and transmission as a unit.What’s the best way to remove engine from car?? Out the hood or out the bottom? 2 post lift is available
I did it out the top. I was seriously demoralized when I checked compression and cylinders 6-8 were low, thinking about tearing apart my low miles car. It was surprisingly easy, even with long tubes and a Moroso oil pan on the motor.
Removed. Getting the trans off was no big deal, did it myself with the car on blocks. Putting it back on was probably the worst part of the whole ordeal, but still not bad.With trans still on the motor or removed?
I have some high temp JB weld if you want me to drop it off at your house this weekend.
Thanks Mark . So many wires to cut lolI have some high temp JB weld if you want me to drop it off at your house this weekend.
Text me if you need a hand. I'll come over and wrench with ya.
No worries. I have a brand new stack of sawzall blades and metal blade for my quick cut saw! Wires, tubes and bolts won't be a problem.Thanks Mark . So many wires to cut lo