Sve drifts

[eng90]

Hey guys,

I have a friend who wants to get sve drifts for his boss..

For ppl whi r still or have used them... whats ur reviews on these wheels ??

Do these wheels stick out of the front or rear fenders ?

And his plans is to put drag radials in the rear... would they fit in no issues or do they rub ?

 

[Grant 302]

They'll fit just fine if he doesn't try to squeeze too much tire on them.

18x10 or 19x9.5?

 

[captdistraction]

It all depends on what size wheel, offset and tire.

I've used them as track and street wheels, I have had 2+ sets of the 18x10 square, and one set of 19x9.5 square. They all fit fairly flush, but I hadn't run a tire wider than 305 on the 10" wheel.

 

[eng90]

Ohh sorry .. the 18x10 wheels .. 43 et but im not sure though

Can he fit 305s in the rear no prblem ?

How tall the diameter can he go with these wheels ??

 

[Mad Hatter]

And on the front as well.

Sent from my SM-G900M using Tapatalk

 

[eng90]

By flush its meant that at same level of the fender right ??

Is this a confirm that with 305 drag radials they wont rub to the outer fender or rub to sumthing inside ?

Do they require wheels hubs ?

 

[Mad Hatter]

Rears with 305/35-18 will be fine, They do stick out a little .... Fronts with 305's tend to rub on the brake ducts (if you have them) but you can still get them to fit fine. Have been using sve drifts for over two years and have had no problems. One of the best deals for wheels out there. You see them all over the place. I really wish they had a 18x11 :'(

 

[eng90]

Thank you for this input.

What do these wheels require ? Different lug nuts ??

Docthey require center wheel hub ?

 

[Mad Hatter]

I just use 3/4" gorilla open ended lugnuts. You can buy a box of 100 for about 35 bucks on Ebay. Once they are a bit battered I just chuck them.

 

[Flyboygsxr]

I have a set of 4 SVE drifts, 18x10 black with pirelli pzero slicks mounted on them for sale. I sold the boss so I have some parts I'll be listing next week. You can run them at all four corners, they don't rub or stick outside the fenders. By far the best bargain track wheel setup IMO.