- 6,396
- 8,276
So I was going to build the limited slip unit in Superbeater, but when I tried to remove the through bolt thst hold the pin in place, it broke.
If this ever happens try fishing it out with a magnet first, in my case the center pin was galded , so what was left of the through bolt wasn't coming out. I went beast mode, using a punch and a hammer to try and force the pin out buy breaking the bolt off internally, but it was a no go.
I finally had to take the bull by the tail and face the situatio , I was able to sneak a grinder, with a cutoff wheel by the ring gear ( barely). I killed the carrier, but there was no way to get the center pin out to remove the axles.
If this ever happens try fishing it out with a magnet first, in my case the center pin was galded , so what was left of the through bolt wasn't coming out. I went beast mode, using a punch and a hammer to try and force the pin out buy breaking the bolt off internally, but it was a no go.
I finally had to take the bull by the tail and face the situatio , I was able to sneak a grinder, with a cutoff wheel by the ring gear ( barely). I killed the carrier, but there was no way to get the center pin out to remove the axles.