The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Tie Rod End Replacement Options

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

207
328
Exp. Type
HPDE
Exp. Level
3-5 Years
Scottsdale, AZ
After a few seasons of track events and an extended break until next season I'll be replacing both the outer and inner tie rods for preventative maintenance. I have a set of new OEM pieces but with the number of options for aftermarket bump steer kits that include spherical tie rod ends, is it advisable to go this direction? The Cortex and SPL Parts kits come to mind. The car is lowered on JRZ coilovers.

Would like to get the group's feedback on these options that have seen extended track use. Failure on these parts is obviously catastrophic so want to proceed with caution.
 

TMO Supporting Vendors

Top