Whats the best way to do Kooks headers with transmission out?

[ArizonaBOSS]

I am not sure the steps on an S550. The general procedures for an S197 (for reference) are here: http://iihs.net/fsm/?d=1116&f=Subframe - Front, 5.0L.pdf&p=1

 

[1Danapple8]

ArizonaBoss,
Thanks man I appreciate the info. Also on a side note I will be spending a lot of time around Prescott AZ this summer if youre down to cruise sometime

 

[ArizonaBOSS]

My "cruiser" is an F250, so probably out for that. But Prescott is a fun town and a nice getaway from the heat of Phoenix.

 

[1Danapple8]

Ahh, my mustang is my daily and my canyon\track car so I cruise all the time. And yeah ill be getting out of the 29 palms heat for the weekends

 

[Swine]

You will probably be successful since you have a tight deadline. I did it over a period of two weeks taking major steps and then reassessing best path forward for my next steps a few days at a time.

I did mine solo on jack stands, I’m the one who mentioned you should consider dropping the K member, and this is the thread I started looking for the same info you are looking for now.

 

[TMSBOSS]

Do you have an auto craft shop on base? Lifts and hoists are a good thing.