The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Which panhard bar?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

1,482
408
I bought a used alum bar so I don't know who made it. It's about half the weight of the stock bar and didn't make any noise at all. It's pretty large in diameter, maybe 50% larger than the stock one. I'd try to find that one if you can. It's fully adjustable on the car unlike some where you have to remove one end. Measure from your rims to the faux frame rails to get it centered within 1/16".
 
Hotchkis springs, Steeda Adjustable UCA, Steeda billet LCAs, Steeda Adjustable Panhard Bar, Developed a clunk on launch at drag strip with Drag Radials but can not duplicate on street set up. Other than that no issues.
 

TMO Supporting Vendors

Top