The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

X-pipe for the Boss 302’s?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=12376

Problem is you're going to lose your side pipes though with any commercially available x pipe.
 

PeteInCT

#LS-378 - So many Porsche's, so little time....
Moderator
2,848
14
Connecticut
mwilson7 said:
http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=12376

Problem is you're going to lose your side pipes though with any commercially available x pipe.

Mark -I assume we lose the side pipes with this X-Pipe also? ("any" meaning including the M-5251-MGTA).
 
Flowmaster has an x-pipe retaining the side pipes but is sold as a whole x-pipe back system.
http://www.americanmuscle.com/flowmaster-boss302-catback.html
 
PeteInCT said:
mwilson7 said:
http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=12376

Problem is you're going to lose your side pipes though with any commercially available x pipe.

Mark -I assume we lose the side pipes with this X-Pipe also? ("any" meaning including the M-5251-MGTA).

You are correct!
 

TMO Supporting Vendors

Top