- Thread starter
- #61
More splitter progress. Rounded the lower half of the nose profile on the leading edges and also countersunk the top and expoxied in the GT500 style wicker splitters. I know they carry a drag penalty with their extra downforce, but wagering the tradeoff is worth it at autocross speeds.
Rounded leading edge profile.
Splitter feed ramp profile sanded into splitter trailing edge. (not perfect, but needed to allow for flush mounting surface)
Splitter wickers recessed and epoxied in place
Overall photo
![52703198143_53d5e78f30_o.jpg 52703198143_53d5e78f30_o.jpg](https://trackmustangsonline.com/data/attachments/84/84092-370731b0e9908025646fb1dee7ee7335.jpg)
Rounded leading edge profile.
![52702222747_783c8f9d17_o.jpg 52702222747_783c8f9d17_o.jpg](https://trackmustangsonline.com/data/attachments/84/84089-aa0da4e8b77f63664d33ee4f25525f92.jpg)
Splitter feed ramp profile sanded into splitter trailing edge. (not perfect, but needed to allow for flush mounting surface)
![52703198138_88782d4b01_o.jpg 52703198138_88782d4b01_o.jpg](https://trackmustangsonline.com/data/attachments/84/84090-2464354a167ffcf6be3b1fff1bff6122.jpg)
Splitter wickers recessed and epoxied in place
![52702187887_d9aabc0217_o.jpg 52702187887_d9aabc0217_o.jpg](https://trackmustangsonline.com/data/attachments/84/84091-537f99b51ee82ac50e3a9010f2b11bdf.jpg)
Overall photo
![52703198143_53d5e78f30_o.jpg 52703198143_53d5e78f30_o.jpg](https://trackmustangsonline.com/data/attachments/84/84092-370731b0e9908025646fb1dee7ee7335.jpg)