Feel free to PM me for any additional questions and/or to shoot me an offer. Prices are all negotiable and located in Pittsburgh, PA.
-Wedge Engineering driver seat bracket + double sliders for S197. Used for about two years, currently bolted to a Sparco Evo 2 seat. I'm assuming could be used for a wide variety of other seats. I don't have a picture of it(at the moment) but it's black and it's a functioning seat bracket.
$100obo
-GLoc R8 rear brake pads(stock S197 rear)(These have one track day(3 sessions) and about 150 street miles. These performed very well and will also make your Mustang sound like a school bus.). $make an offer
-Ford racing front hubs with ARP extended studs. Will include new Motorcraft fasteners and Motorcraft dust covers [installed same time as the brakes-one track day(3 sessions) and about 150 street miles]
$210obo
-Blowfish racing bracket and Barton version 2 short shifter (MT82) [Purchased used but never installed]
- Opmustang 1/2"-20 High Strength Racing Lug Nuts in Satin Black w/ low friction coating Quantity 20 [installed same time as the hubs-one track day(3 sessions) and about 150 street miles]
- ARP extended rear studs (100-7723) Quantity 10 [installed same time as the hubs-one track day(3 sessions) and about 150 street miles]
-OPMustang 25mm front hubcentric spacers(later versions) [only used to test fit the Forgestars]
-Cortex Xtreme grip offset street coilovers, installed for about two years, three track days, and about 1,500 street miles.
[has some dings on one of the front coilovers near the sway-bar end link mount due to a rushed removal]
-Wedge Engineering driver seat bracket + double sliders for S197. Used for about two years, currently bolted to a Sparco Evo 2 seat. I'm assuming could be used for a wide variety of other seats. I don't have a picture of it(at the moment) but it's black and it's a functioning seat bracket.
$100obo
-GLoc R8 rear brake pads(stock S197 rear)(These have one track day(3 sessions) and about 150 street miles. These performed very well and will also make your Mustang sound like a school bus.). $make an offer
-Ford racing front hubs with ARP extended studs. Will include new Motorcraft fasteners and Motorcraft dust covers [installed same time as the brakes-one track day(3 sessions) and about 150 street miles]
$210obo
- Opmustang 1/2"-20 High Strength Racing Lug Nuts in Satin Black w/ low friction coating Quantity 20 [installed same time as the hubs-one track day(3 sessions) and about 150 street miles]
- ARP extended rear studs (100-7723) Quantity 10 [installed same time as the hubs-one track day(3 sessions) and about 150 street miles]
-OPMustang 25mm front hubcentric spacers(later versions) [only used to test fit the Forgestars]
-Cortex Xtreme grip offset street coilovers, installed for about two years, three track days, and about 1,500 street miles.
[has some dings on one of the front coilovers near the sway-bar end link mount due to a rushed removal]
Last edited: