Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!
Running a 2007 GT with Bilstein shocks and Pedders springs. This is a daily driver and some light track use. I am wanting to upgrade to coilover system. I am looking at Maximum Motorsports JRI coilover kit with stock lowering perches or the Kenny Brown KB-SPEC JRZ RS1 with true rear coilover...
Running a 2007 GT with Bilstein shocks and Pedders springs. This is a daily driver and some light track use. I am wanting to upgrade to coilover system. I am looking at Maximum Motorsports JRI coilover kit with stock lowering perches or the Kenny Brown KB-SPEC JRZ RS1 with true rear coilover...
Parts were not mismatched. I purchased the car with a complete FRPP suspension. I had the K springs but they were too low for street driving in my town. I replaced the FRPP K springs with the Pedders to raise the car 1/2"(they were similar rate to the FRPP springs) so it could be driven...
Spoke with Kenny and here is what I got. He only used a Panhard Bar on the SN95. So I guess for at least 8 years no one with his PHB relocation kit has inquired about sway bar usage. Very simple to me if his complete systems needs a minimum spring rate to run without swaybar, it should be...
Yes that's the plan to dump it. I had his set up yers ago, and it was nice. I just have a problem with his claims you can run a rear sway bar, and then does not give customers the size. IF a sway bar cannot fit due to clearance, he should state that. Also, the ads need to be changed, stating...
My PHB is level at the lowest setting. I get lots of push in left bank turns, its to a point I am nowhere confident to try to push the car in those types of turns. When I was running the Ford Performance package with rear sway bar, I was not exhibiting this kind of push. The car was more...
Front bar is in middle hole. Springs are Pedders 200 front/186 rear linear. Have tried with two staggered set ups. 18x9.5 all around with 255/24/18 front and 175/40/18 rear. The other set up is 18x9.5 with 275/40/18 front and 18x10 with 285/40/18 rear. The 9.5/10 stagger seems to push just...
I have a complete Kenny Brown set up with PHB relocation kit and front K member set up and control arm relocation brackets. Car previously had the complete Ford suspension package. I do not have Coilovers, and am not looking to upgrade to Coilovers. After instillation of the Kenny Brown kit...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.