The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Recent content by CZehntner

  1. CZehntner

    Steeda front control arm issue

    Hey all. Looking for some feedback and help on this subject. So I recently ordered the boss 302 competition front lower control arms through steeda. Today I received my control arms. I'm thinking I was sent the wrong set but steeda customer service tells me the part is the same part. The part...
  2. CZehntner

    S550 Set of 19x11 flow formed wheels with Michelin - SOLD

    Are these still available? Would shipping be an option?
  3. CZehntner

    Here goes my MASSIVE learning curve

    Is a boss 302 required for this luxury? 😂
  4. CZehntner

    Here goes my MASSIVE learning curve

    I was not aware of that thank you! I'll have to start one as well then. Much appreciated!
  5. CZehntner

    Here goes my MASSIVE learning curve

    I greatly appreciate you chiming in no worries! As the car is currently still mostly my daily my tire choice would lean more towards street setup with occasional track use as I'm not up to that level yet. How do you like the g-locs? I've heard great things but not much from a more street use...
  6. CZehntner

    Here goes my MASSIVE learning curve

    I also would be driving to and from the track. This is good to know thank you for chiming in.
  7. CZehntner

    Here goes my MASSIVE learning curve

    I'll be giving that a thorough go through after work, thank you!If you don't mind me asking, what is your setup for brakes, tires, and wheels? Offsets, dimensions, reasons why, problems, what would you change etc?
  8. CZehntner

    Here goes my MASSIVE learning curve

    Say I went this route, does that mean I'd need spacers in the rear as well for my 14? I'd like to be able to rotate the wheels as well if I went this route since it is also currently my daily.What wheel specs should I look for if I'm going 18x11? Offset? And I'm assuming go towards apex for...
  9. CZehntner

    Here goes my MASSIVE learning curve

    I'd like to stay away from spacers because I'm not comfortable with the idea of having one to be honest. Just something that doesn't sit right with me; I've also heard spacers can fail at times which generally leads me back to the avoidance of them.I'm not opposed to having two set of wheels...
  10. CZehntner

    Here goes my MASSIVE learning curve

    Would there be a dramatic downside to going 18x10 vs 18x11? I'd like to not run a spacer if possible
  11. CZehntner

    Here goes my MASSIVE learning curve

    Hallo! Nice to see someone else on here that speaks german!Tires- definitely! I'm currently on the look out for stronger wheels and better tires as well. I'd like to keep the 19x10 offset on a wheel choice I'm currently interested in. Are there any tires you could recommend that perform well...
  12. CZehntner

    Here goes my MASSIVE learning curve

    Agreed. It doesn't necessarily mean they need to be replaced, however recently while I was under the car doing maintenance and my general inspection, I noticed the bushings have tears in them. So I'd like to upgrade them for something that's more recommended for the sport.
  13. CZehntner

    Here goes my MASSIVE learning curve

    Ah. Apologies. Used the wrong term on my end then. I meant flow forged. I've been looking at apex wheels quite a bit as well as project 6gr wheels.And I've seen black sheep post quite a bit in these forums. I appreciate the sarcasm. My reply to his was simply to add more humor. I'm german so...
Top