Has anyone encountered issues with the TC/ABS kicking on in corners and this particular brake upgrade ?? I had my boss at CTMP last week and the front wheels were randomly locking up in the middle of turn 2 (which in itself is terrifying) and turn 8 (high speed sweeper).. TC was in sport mode as...

Thanks BillI wanted to get a great handling car that still had the nice rumble that folks give thumbs up to.I basically threw a Maximum Motorsports Road and Track Grip box with the exception of the springs on the car, installed Apex wheels with reasonable rubber (PS4's) and just have tons of...

This is the Build Thread for Great White. Reply below.

Correct

After parking near a crater at TMP where a C7 Z06 burned to the ground due a fuel fire, I also was looking for a extinguisher and mount that would work with out a cage Ended up going with an element fire extinguisher (https://elementfire.com/) and a universal mount that I massaged to fit the...

Mosport DDT back in September

2013 Boss 302 - Performance White (aka Great White)APEX Wheels: EC-7 in Satin Black Front: 18x10” ET43 EC-7 with 285/35-18 PS4S Rear: 18x10” ET43 EC-7 with 285/35-18 PS4S Suspension: Ford Racing T-Springs with Koni SA (Yellow); MM CC Plates; MM LCA/LCA brackets/PHB

Stupid question, but if the system detects an issue with the TPMS will Advancetrac etc be able to be disabled ? In other cars I have had, if an issue was detected with the TPMS then the traction control would not be able to be turned off.....

New owner as of 09/07/2019Model Year - 2013 VIN - 225564 Boss - 0782 Paint sequence number -123 Build Date - 2012/05/15 Blend Number -5992 Commit number - Rapid Spec Option - Paint Color - Performance White Stripe Color - Black Options - Recaros and Torsen - Cover and Mats Owner - Mark aka...

Understood, wanted to get under and clean everything up, the bottom of the covers were in rough shape....Was able to remove them without much difficulty; just used my plastic trim tools and a bit of patience

Newbie here, Ive just got myself a set of 06mach1's jacking plates and I'm trying to get the rocker covers off my '13 Boss. Ive removed the 8 "Xmas tree" fasteners and the front 2 pins but I'm having a time getting the cover off. Researching this, there are 8 "hidden fasteners" and all that is...