My rotors look like your second one so they appear to be normal. I can just hear the pad touching the rotor face as I’m coming off the track at idle speeds. The rotors have two track weekends on them, I don’t really daily it. The pads have about half life left; Ferodo DSUNO pads. I was thinking...

So just finished a couple sessions at Road Atlanta and every time I come off the track I still hear the brakes touching the rotors. Is that normal?I think that’s why I’m going through rotors because it’s leaving pad material on there every time I come off the track and let the car sit even...

I’ll be out there Monday you are around.

!Thanks man you just saved me a whole lot of trouble!

Do you mean remove the other three bolts?

Well, this is what I get for trying to get a rush job done. I have managed to wedge my ratcheting socket against a flange.Please tell me there’s a way to get this off of here… I already removed the spindle nut, and it didn’t help.

Thanks everyone. I’m gonna chalk it up to not following the correct bedding process for the first 2 sets. I may go back and try to sand them just so I don’t have to spend another $700 on rotors when the time comes. The new Dunso pads did perform well on the track yesterday at Road ATL.I also...

I have a 2020 GT 350 that I have now gone through three sets of rotors because of steering wheel shake during high-speed braking (150 to 60). The previous rotors were using stock brake pads so now on the 3rd set I purchased Ferodo Dsuno pads.I bedded them with a good 20 or so stops on the...

I have this cracking on my right front. Any concerns or can I continue tracking the car? I’m currently at an event this weekend.

Does anyone know where I can buy one or when they are available?

Yeah on FP springs.

Yeah, I’m going back tomorrow morning to have them reset the rear to 2.2-2.4 and front at 2.6-3.0.does anyone have suggestions on the correct toe and caster for F/R?I know what the supplement guide says, but I’m I’m looking for real world experience

Thanks everyone. I just had the suspension rechecked an updated.. Here are the new settings. Going out the road Atlanta on Wednesday so I’ll report back any findings.