The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

Register Log in
  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Recent content by JPowL

  1. JPowL

    Output Shaft Flange Nut Location for TSB 19- 2135?

    105 ft-lb
  2. JPowL

    Rental Trailers

    You have to remove the front tire stops on the trailer (2 bolts per stop) for a lowered GT350 to work.
  3. JPowL

    Output Shaft Flange Nut Location for TSB 19- 2135?

    It is that simple, but the TSB requires replacing not only the flange nut, but also the other bolts/nuts for the drive shaft as well.
  4. JPowL

    Output Shaft Flange Nut Location for TSB 19- 2135?

    I know this is late, but yes, that's the nut that needs tightening. I've had the same issue. Retorqued and symptoms went away for 3 track days, but it's back. I'll use red locktite this time.
  5. JPowL

    Rental Trailers

    I'll be at NCM that weekend too! Just started researching uhaul trailers for the GT350 and found this thread. Another local buddy will be towing down his GT350 as well :-)
  6. JPowL

    S550 gt350

    '17 GT350 SCCA CAM-C "lite" build Ford Perf lowering springs Eibach front sway Maximum Motorsports Camber plates BMR Cradle Lockout kit Steeda subframe alignment bushings -3.2F -2.1R APEX SM-10 wheels in GT350R offsets Autoblip for track
  7. JPowL

    Lap Time Thread

    PB at Gingerman last year 1:37.40 even with 2 bobbles. 2017 GT350 with FP springs and eibach front sway 305/30R19 GY SuperCar3's (not 3R).
  8. JPowL

    S550 gt350

    This is the Build Thread for gt350. Reply below.
  9. gt350

    gt350

See more
Top