@thehueypilot True. That’s something I haven’t considered. But after the recall has been carried out, that should not be happening anymore? At least I hope so.@TMSBOSS You are right. But I installed both, the original belt and the harness. Off the track, I use the normal belt. So a properly...

My plan is to measure what distance the original seat has to the steering wheel when the sensor just reaches the end of the rails and closes or opens the respectice sensor circuit.I will then mount the sensor on the self-built seat console in a position similar to the one on the original sear...

Oh I found a picture of the sensor:It’s called „seat track position sensor“, part no. 8L2Z14B416A according to ebay.

I will post here what I posted in another forum:I didn’t take pictures while installing the seat because we were in a hurry but it will come out again anyway.There is three connectors on the harness of original Recaros (I think): Seat belt fastener (white) and this switch (black). A third...

Hello there,Question from the workshop, a little urgent cause I need that sorted out by tomorrow:We just removed the factory drivers seat on my MY2012 Boss 302. We modified an old seat console to hold a racing bucket seat. We found a little magnetic sensor then on the right side of the seat...

Seeing that neither the position of the crotch belt mounting points before the lap belt mounting points, nor the 20° angle described in the Schroth manual would be guaranteed with this mounting option, I would not recommend doing this without getting in touch with Schroth. Their support is...

At the moment, I am using the Schroth Profi III-FE asm. But only as a 4 point harness. I used the original mounting points and installed it together with the normal seat belts for legal reasons. In the back, for the shoulder belts, I am using the ISOFIX-mounting points.I am planning to install...

@TMSBOSS I'm sure there are, but having them sent to Germany and paying customs and taxes means that parts like these usually cost double than what they cost in the US.I'll check out the Cobra Jet grill nonetheless, thank you!

I am pretty happy with the car so far. I had an BMW E46 M3 before that and I was not expecting the Boss 302 to perform so well even before I had any mods installed. Which probably tells more about my driving abilities than about the two cars...But about the grille, what's the way to go here...

Dear forum,I do not have the 2012 manual for my car, but the 2013 manual I got as pdf tells me to remove the fog light covers for track days.The thing is that in my grille, the are not removable. The grille is cast in one piece.Are they only removable on the 2013 Boss? Or does that mean I...

Well, #2366 is registered now :-)

Dear Forum,this is my first post here (apart from the one in the Boss 302 registry thread).I have tried the search but found nothing on my question so I will be brief in case this has been answered before.My problem is this: Depending on weather conditions and availability of...

[Model Year] = 2012 [VIN - full vin or last six digits only] = 262066 [Boss or LS number] = 2366 [Paint sequence number - from Boss owner's kit] = ? [Build Date - from window sticker or door tag] = 2011/10/19 [Build Date - from Boss owner's kit] = ? [Blend Number - from window sticker or door...