They also ask $600 for the cable set... compare to $220 from Capaldi

FP has the rear wing kit for $2500 https://performanceparts.ford.com/part/M-17839-FP350S#detailTabSimilar It's pretty much the APR 71 inch GT250 spec wing (AS-207125) with custom end plates and flap delete. You can get the APR wing for $1400 ish plus the custom end plates (Should be in $200...

Anthony was rocking the special ordered 19" TE37 for his GT350 before swapped 18" gs1r. They are 19*10.5 all around. I'm very close to a local JDM shop that the owner told me Volks would custom make any wheels for him with 5 sets of minimal order and he had done that several times consider they...

I just used the info on the post #14 from Fred as my reference. The approaching way I used was using that 18" length as a base line to zoom the photo 1:1 in the AutoCAD. Then I traced all the outline of the end plate. After I finished the trace I took the measurement at other place where Fred...

I finally got them this morning and tested the fitment. The cutting is good and it's perfect for the whole positions. One thing isn't good enough is the carbon fiber pattern seems not as even as the one APR use but I can live with that. Thanks Fred! (The photo quality is horrible as my car is...

Yes I did. One of the best mods for sure.https://www.essexparts.com/news-blog/a-couple-more-mustang-gt350s-hit-the-track-with-our-radical-competition-brake-kit

When I was ordering my wheels from an after market wheel company they acquired the wheel spec from Ford Racing school to fit on their FP350S: 18*11 et 18 18*11 et 56 It seems to be the spec on FP350S but in order to fit 18 inch wheel you need to do the AP racing brakes first. They fit perfectly...

Which steering wheel hub adapter do you use in order to install the quick release steering wheel? I found myself have some trouble to get out of the car without quick release steering wheel.

Finished the measurements and CAD. Will reaching out the people to do some carbon fiber CNC next Monday. Thanks again and keep up update for the hood vent!

Thanks Fred! Almost finish the CAD but I'd also need to know the distance between two mounting screws and the diameter of the hole to make sure the fitment. And I will contact people to do some carbon fiber CNC after this.

Really appreciate it! Feel free to share the dimension here or to my email: [email protected]

I'm getting one for sure! Side question: Would you also consider offering the GT4 dive planes and FP350S wing's end plates?