The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

Register Log in
  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Gen 3 Coyote PCM relocation for single turbo install on 2019 Bullitt

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

NGOT8R

NGOT8R

58
52
Exp. Type
Drag Strip
Exp. Level
Under 3 Years
Florida
Has anyone here relocated their PCM on a Gen. 3 Coyote Mustang to accommodate a wire tuck for a turbo install?

I’m currently installing a BL Fabrications 88MM single turbo on my 2019 Bullitt and info. is scarce regarding PCM relocations. Any help would be greatly appreciated. Thank you.
 
I haven't and can't help you. I just wanted to post to encourage you to post more about this turbocharged Mustang build as you create it.
 
Junkyard Dog said:
I haven't and can't help you. I just wanted to post to encourage you to post more about this turbocharged Mustang build as you create it.
Click to expand...
Copy that Junkyard Dog. Ask and you shall receive…I am currently deep into the weeds on the install and it has been extremely challenging at almost every turn. So much has had to be modified, but I’ve made a considerable amount of progress thus far. With that being said, here’s the link to my turbo build thread which contains the good, the bad and the ugly. This is definitely not a mod for the faint of heart.

www.mustang6g.com

BL Fabrications 88/96 turbo install on 2019 Bullitt

After 7 long weeks of moving into the new house and getting settled, I’m finally ready to start work on the turbo and supporting mods for my Bullitt. Here’s a tentative outline for the project. remove front end rear bumpers remove existing fuel system assemble new fuel system, measure out the...
www.mustang6g.com www.mustang6g.com
 
You must log in or register to reply here.

Similar threads

Junkyard Dog
Is this Hellion Twin Turbo S550 Road Race Mustang Here?
Replies
10
Views
880
JAJ
Advice on setting up my car for gain confidence
2
Replies
31
Views
800
bnight
bnight
biggsy
Gen 3 5.0 Shortblock Price increase
Replies
3
Views
3K
biggsy
biggsy
Gen 2 Coyote Parts List GT500 Pan Swap
Replies
9
Views
1K
Bouncing Soul
Amon
Abs connection with gen 3 coyote control pack
Replies
1
Views
2K
Tri-bar
Tri-bar
Apex Wheels
Cortex Racing
Late Model Restoration
Middleton Motorsports
Modular Motorsports Racing
Optimum Performance
SouthFloridaParts.com
Vorshlag Motorsports
Autoblip
Hooked on Driving
Mustang Geek
SCCA CAM Challenge

Latest posts

Latest lap times

All Upcoming Events

Buy TMO Apparel

Buy TMO Apparel

TMO Vendor Posts

Top