This is the Build Thread for 05 4.6 3v NA Track Build in Progress. Reply below.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Nice! Got mine at about 162k and almost completely bone stock. It's at about 193k now, and still running strong.Nice to see another 3 valve on here. Be sure to check out Project Superbeater for some tips, and things to avoid along the way.
Welcome to the sight.
There is a cooling mod on there someplace that will be important.Nice! Got mine at about 162k and almost completely bone stock. It's at about 193k now, and still running strong.
I definitely felt your pain about the AC crapping out, as I live in Florida as well (although I'm moving to the Northeast some time next year). My compressor kinda seized and went kaboom, and sent shrapnel through all of my AC internals. Had to get all new AC components.
Other than the old 3 valve spark plug problem (mine are definitely not the stock 2 piece anymore) and 3 inch brake ducts being much easier to install over 4 inch, what else would you recommend avoiding?
Hmmm, my sister has an 08 mustang GT... lolThis..mustang 05-09 cooling mods
let's see how this goes... The 05-07 mustangs have a goofy coolant flow scheme, basically the thermostat is on the cool side of the engine, where most thermostats are on the hot side. The problem with this (well one of them) is that the temperature is always "delayed" or inaccurate, if the gauge...trackmustangsonline.com