- 66
- 0
Read this a few click s too late.
Sent from my DROID4 using Tapatalk
Sent from my DROID4 using Tapatalk
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
cp85gt said:I received my order from Tasca yesterday and to my surprise the fog light bezels with the part # CR3Z-17E810-AA & 811 are the standard blocked out bezels for the standard Boss 302 and the OEM installed bezels on the LS Boss 302. I originally ordered the BR3Z-17810-AA & 811 and switched it, so I'm sending these back and ordering the correct bezels. So to summarize: for those with 2012 Boss 302's, or anyone with a 2010-2012 mustang with a California Special front valence, that wants the open fog light bezels for a brake cooling set-up or fog lights, the part number is BR3Z-17810-AA and BR3Z-17811-AA. These are also about $26 each instead of $47.31 each.
pufferfish said:saving $95 over the FRPP kit is pretty huge!
WinterSucks said:Did the B parts turn out to be the right ones? I have seen conflicting info on which ones are correct.
Email, PM, smoke signals, etc., sent!pufferfish said:parts arrived today...1 full week early! test fit and they are perfect! tomorrow, i will start getting the tubes cut and welded on. hope to have them off to the powdercoater by the end of the week. i won't be able to put them up on the site until i get them back (need finished product for pics), but i can take orders over the phone (paying by cc) or by email (with a paypal account) if you want to make sure you get them first. prices are set at $74.99 shipped in the US...same as the backing plates. pre-cut bezels will be extra, of course.