PART 1
I share here my experience, I've made by the replacement from the original boss spoiler to the GT/CS, Laguna Seca rear spoiler.
first it needs the right mood, your favorite music, good beer and a lot of time. again: take enough time!! and read the instructions!!!
I have used this tools:
- a thin (0.8mm) nylon thread from a lawn trimmer
- a 19mm hole-saw with a 8 mm centerdrill
- a strong painter tape
- Nylon Trim Tool Set
- 3 + 8mm drill
- file
- hot air gun
- cordless drill
- touch up paint
- rtv gasket
- all the other tools thats listet on the Instructions
i did this on a clean, dustfree car;-)
remove the factory spoiler:
remove the cover inside from the decklid and the 2 plugs that cover the nut. the plugs will be reused! don't trow it away
carefully remove the 4 nuts.
cover the spoiler and the decklid with the painter-tape and some blankets.
use a 15 inch long piece from the nylonthread and begin on a side carefully to go between the decklid and the spoiler. pull up slightly on the same end on the spoiler helps to do this.
if you have the thread between make sawing motions until reaching of the first pin.(run the thread slightly towards spoiler and not to the decklid!!!) slightly pull up the spoiler everytime. use one of the nylon trim tools.
cut as much as possible around the pin and push through the thread after the pin. use the nylon trim tools to pull up the spoiler everytime.
once more: take your time to do this!!!!
when the spoiler is removed clean the decklid.
![P1010828_zps6f9c8535.jpg P1010828_zps6f9c8535.jpg](https://trackmustangsonline.com/data/attachments/35/35046-5ee834b64f528702398abfc38ea2fa6a.jpg)
I share here my experience, I've made by the replacement from the original boss spoiler to the GT/CS, Laguna Seca rear spoiler.
first it needs the right mood, your favorite music, good beer and a lot of time. again: take enough time!! and read the instructions!!!
![34891ADE-A922-40D8-A32B-58ABBF3272AE_zpsaik5jx5z.jpg 34891ADE-A922-40D8-A32B-58ABBF3272AE_zpsaik5jx5z.jpg](https://trackmustangsonline.com/data/attachments/35/35038-2b5e177b7819b6e8a63b47719eb5d68c.jpg)
![A58CAB26-3E10-472D-A13D-982BCDDE0265_zpsjugomttv.jpg A58CAB26-3E10-472D-A13D-982BCDDE0265_zpsjugomttv.jpg](https://trackmustangsonline.com/data/attachments/35/35039-d94d165d685ee3e9e6b1715676c1752c.jpg)
I have used this tools:
- a thin (0.8mm) nylon thread from a lawn trimmer
- a 19mm hole-saw with a 8 mm centerdrill
- a strong painter tape
- Nylon Trim Tool Set
- 3 + 8mm drill
- file
- hot air gun
- cordless drill
- touch up paint
- rtv gasket
- all the other tools thats listet on the Instructions
![P1010815_zps93d7f885.jpg P1010815_zps93d7f885.jpg](https://trackmustangsonline.com/data/attachments/35/35040-0126648ee5eaee74083f0d107f6025ae.jpg)
i did this on a clean, dustfree car;-)
remove the factory spoiler:
remove the cover inside from the decklid and the 2 plugs that cover the nut. the plugs will be reused! don't trow it away
carefully remove the 4 nuts.
![P1010819_zpsf5d6b2e5.jpg P1010819_zpsf5d6b2e5.jpg](https://trackmustangsonline.com/data/attachments/35/35041-b47dcb635f29049e32e16ae58731f9ff.jpg)
cover the spoiler and the decklid with the painter-tape and some blankets.
![P1010824_zps4c6d809a.jpg P1010824_zps4c6d809a.jpg](https://trackmustangsonline.com/data/attachments/35/35042-7561e3d87180aab93c4d00b734bfc7b3.jpg)
![P1010822_zps2e984e09.jpg P1010822_zps2e984e09.jpg](https://trackmustangsonline.com/data/attachments/35/35043-83d0b94133de50b4bb8e9306312a1d3b.jpg)
use a 15 inch long piece from the nylonthread and begin on a side carefully to go between the decklid and the spoiler. pull up slightly on the same end on the spoiler helps to do this.
if you have the thread between make sawing motions until reaching of the first pin.(run the thread slightly towards spoiler and not to the decklid!!!) slightly pull up the spoiler everytime. use one of the nylon trim tools.
cut as much as possible around the pin and push through the thread after the pin. use the nylon trim tools to pull up the spoiler everytime.
once more: take your time to do this!!!!
![P1010827_zpsb1624594.jpg P1010827_zpsb1624594.jpg](https://trackmustangsonline.com/data/attachments/35/35044-0fa8351730f302afed877588c43843bc.jpg)
![P1010825_zpsd8401435.jpg P1010825_zpsd8401435.jpg](https://trackmustangsonline.com/data/attachments/35/35045-0cd085f5d8e884e1edb7e4b0592cad5c.jpg)
when the spoiler is removed clean the decklid.
![P1010828_zps6f9c8535.jpg P1010828_zps6f9c8535.jpg](https://trackmustangsonline.com/data/attachments/35/35046-5ee834b64f528702398abfc38ea2fa6a.jpg)