50Deep
Jockin' GT350's
it is there. Just keep scrolling down the new parts section. It has it's own page separate from the non titanium modelAMPowerJ said:I can't seem to find the titanium version for the GT350 on your website. What am I missing?
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
it is there. Just keep scrolling down the new parts section. It has it's own page separate from the non titanium modelAMPowerJ said:I can't seem to find the titanium version for the GT350 on your website. What am I missing?
You can always call us. we are in the shop most of the time and easier to call us. We now have the Camera Transponder mount for the tow hooks coming soon!50Deep said:it is there. Just keep scrolling down the new parts section. It has it's own page separate from the non titanium model
The project is nearing completion. I partially removed my front bumper for the front install. I removed the lower diffuser-fascia for the rear. To get the bumper hole drilled, I rigged up a tool with a small square, a level, and a piece of 1/8" aluminum. I drilled the bumper hole first, then mounted the receiver...so I was sure the hole would line up. I also used masonry bits to drill the bumper holes. My brand new Harbor Freight bits didn't work at all I read that bits made of cobalt should drill through the hardened steel. I had some cheap masonry bits lying around, so I used them.jlwdvm said:Received my front and rear hooks for my '16 GT350 yesterday! Any install advice from anyone? I will have the car up on my 2-post lift.