The Mustang Forum for Track & Racing Enthusiasts
Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.
- Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!
thelostotter's latest activity
thelostotter replied to the thread Gen2 - Spun a bearing.In that case I’d really recommend putting 5 gallons of 100 unleaded in with each tank based on my own experience. No tune required. (see full post)-
thelostotter replied to the thread Gen2 - Spun a bearing.I don’t see the value in an Aluminator unless your stock block and crank are trashed. If you have a machine shop you’re comfortable working with you can achieve something at least the same, probably better for less money.I rebuilt my engine... (see full post)
-
thelostotter replied to the thread Gen2 - Spun a bearing.I’m using that Moroso pan and it works well. But if the 500 pan kit existed when I built my motor I would have seriously considered it. I don’t know much about it but the high volume oil pump sounds like a good investment.I used my existing gen... (see full post)
-
thelostotter replied to the thread Harsh ride on Steeda linear springs?.The clunking is probably the sway bar end links. Those make noise if they aren't real tight. (see full post)
-
thelostotter replied to the thread Very Uneven Brakepads.That happened after one track day? Then I'd say your pad compound is not aggressive enough and you're getting them too hot. The leading edge side of the pad gets much hotter than the trailing side. You'll probably notice the paint or metal is... (see full post)
-
thelostotter replied to the thread Oil Cooler Setup, Thoughts and Questions.The Harrop kit mounts really well and works well enough for me (after upgrading the fittings and lines to -12, this makes a huge difference), it’s not quite adequate to push for 20 minutes straight in the AZ heat but a cool down lap thrown in is... (see full post)
-
thelostotter reacted to GAR944's post in the thread Pics of your GT350 or S550 Mustang at the track! with
Like.Phillip Island Racetrack - Victoria AustraliaNot my greatest laps due to left front wheel deciding to change camber early in the session. Still setting the suspension up so it is definitely a work in progress. Anyway you guys get to see a track... -
thelostotter reacted to stang99svt's post in the thread GT350/GT clutch bleed assistance/guidence with Like.I mean mine seem to take a little effort to fit but once I got it on there it seemed to do the job.