The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

1 Piece Driveshaft; CV vs U Joints.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

64
55
Exp. Type
HPDE
Exp. Level
Under 3 Years
St Louis, MO
I know this has been discussed , but want a sanity check on this logic of thinking. I was leaning towards getting something with the CVjoint on the axle end with logic that these are really more forgiving with CV angles. Adjusting angles is not outside my wheel house but I don't have an adjustable upper arm (yet). The DSS for this car has the CVjoint on the rear, but I'm gun shy on DSS. Had a carbon fiber one on my 350 and it vibrated enough for me not to live with. QA1 immediately solved that problem. I'd actually be favoring Gulf Coast, but it looks like their 197 shafts have U joints on both ends. Great connections with non adaptors and such, but still U joints, albeit top shelf. And with QA1 apparently out of the driveshaft business (even though everything is still showing available on their site). So I guess this thread is mainly about the CVjoint style vs U joints on the axle end, and how that could be much more forgiving in the NVH department and not as critical about angles. Thoughts?
 

Buy TMO Apparel

Buy TMO Apparel
Top