The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Adding a Setrab 9 60 cooler, in the trunk!

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

From the post: "After seeing engine oil temps of almost 300 degrees while tracking with stage II whipple and LTH, I had to get creative. Already had the PP oil cooler and it wasn’t cooling too effectively. So we plumbed in a 9 series 60 row setrab oil cooler mounted in the spare tire boot. Oil temps went from 220-240+ to 208 with actually 185 going in setrab and 170 coming out. Increased capacity to 13.9 quarts as well."

So 300 degrees. Something had to be done. But from there it gets a little weird.

If there is a 185 actual temp going into the Setrab cooler, then I am thinking, "Is there a hot oil problem?"

Is the oil cooling off in the line going to the trunk before it gets to the cooler? Maybe just run a line to the back of the car and then again to the front with no cooler . . . LOL

Even 220-240+ does not seem all that high on his prior setup with the PP oil cooler, considering he is tracking with a Whipple (stage 2).
 

Buy TMO Apparel

Buy TMO Apparel
Top