The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Boss on drag radials runs 11.7 @117

ArizonaBOSS

Because racecar.
Moderator
8,524
2,331
Arizona, USA
And here is a run on street tires...

[youtube]http://www.youtube.com/watch?v=fFe2-2YNdL4[/youtube]

Looks like the car could benefit from a stiffer UCA bushing if you intend to drag race a lot.
 

ArizonaBOSS

Because racecar.
Moderator
8,524
2,331
Arizona, USA
cloud9 said:
I'm pretty impressed with the results. This car just pulls. I'm not sure how long that Torsen diff will hold up to launching on MT's at 15 psi.

I'm with you on that one, I'll let someone else find that out. I won't be doing much drag racing, but I won't be throwing sticky tires out back for that anytime.
 
I've never run at a drag strip before but there is one in town. Might be fun to do once but I'll probably go out there and embarrass myself. Is that guy using launch control? ;D
 
From a former drag race guy now track guy this is pretty dam awsome. I remeber when I put a 2.93 pully on my Cobra and dynoed at 487bhp at the rear wheels and ran a 12.08 with a 1.80 - 60 ft with a set of Nittos. So needless to say I am pretty impressed.
 

TMO Supporting Vendors

Top