The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

BTI Aerodinamica Carbon Fiber Wing Uprights/Risers

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

wildcardfox

Supporting Vendor
1
1
Exp. Type
HPDE
Exp. Level
3-5 Years
SoCal
BTI AERODINAMICA

Carbon Fiber Wing Uprights | 2020–2022 Shelby GT500 • 2005–2009 Mustang • 2024+ Mustang S650

0S2A7862.jpg

THE PURSUIT OF SOMETHING BETTER
Aerodinamica began with a simple question: How could the Shelby GT500 Carbon Fiber Track Package (CFTP) wing be raised to the height of the 2017–2023 Mustang GT4, where the airfoil was designed to operate, while retaining the lightweight, one-piece carbon fiber construction of the factory uprights?

The vision was to create something that looked as though Ford had designed it, blending OEM-inspired styling and attention to detail with the elevated design and engineering innovation seen in performance marques like Porsche and Lamborghini.
_Q1A1775.jpg
More than a year of development followed, involving 3D scanning, prototyping, numerous precision-machined molds, multiple design revisions, and over 4,000 miles of on-road and racetrack testing. The result was a one-piece carbon fiber upright engineered to deliver the additional height without compromising the lightweight construction and refined appearance of the original factory design.


ENGINEERING BEYOND THE SURFACE
The details extend well beyond appearance. Each Aerodinamica upright features a precision-sculpted underside with a replaceable Buna-N 70-durometer O-ring, designed to seal against the vehicle’s mounting surface and help prevent water intrusion.
0S2A7872.jpg
The mounting hardware receives the same attention. Aerodinamica incorporates custom-engineered 7075 aluminum embedded fasteners and 6061 aluminum bosses at the wing mounting points. These components provide durable mounting interfaces while protecting the surrounding carbon fiber.
0S2A7866.jpg
Every upright is finished with premium House of Kolor paint and clearcoat for outstanding UV protection and lasting appearance. A premium paint option, professionally finished by an automotive paint shop, is also available.


CONSTANTLY EVOLVING
Aerodinamica has continued to evolve through successive generations of manufacturing technology, ultimately advancing to aerospace-grade prepreg carbon fiber. This evolution brings improved structural consistency, greater heat resistance, refined surface quality, and a more pronounced carbon fiber weave.
Prepreg pic.jpg
Today, the lineup extends beyond its original GT500 application into additional Mustang generations and dedicated racing applications. Each upright is engineered for its specific vehicle and wing configuration, but all share the same philosophy: lightweight construction, purposeful design, and an uncompromising approach to engineering.


⸻

THE AERODINAMICA LINEUP


AERODINAMICA GT4


0S2A7862.jpg
THE OG.
The upright that started it all.

Developed specifically for the Shelby GT500 Carbon Fiber Track Package wing, Aerodinamica GT4 raises the factory wing approximately 2 inches above its original mounting position.

Its one-piece carbon fiber construction preserves the factory mounting points, hardware, and angle of attack while delivering an exceptionally lightweight alternative to traditional aftermarket uprights.
_Q1A1972-2.jpg
At approximately 424 grams (0.93 lbs) per upright, Aerodinamica GT4 combines structural integrity with the refined appearance expected of an OEM-quality component.

Now manufactured using aerospace-grade prepreg carbon fiber, the latest generation maintains the original lightweight construction while advancing material performance and manufacturing quality.


AERODINAMICA TL
TALL RAISES THE STOCK WING TO NEW HEIGHTS.
Screenshot 2026-11-19 at 5.37.06 PM.png
Aerodinamica TL raises the factory GT500 wing approximately 4 inches above its original mounting position, bringing a more commanding presence to the car without sacrificing the advantages of lightweight carbon fiber.
_Q1A2394.jpg
While competing four-inch risers rely on two-piece aluminum construction, TL takes a different approach with its one-piece carbon fiber design. The result is a beautifully integrated, exceptionally lightweight alternative that delivers additional wing height without the unnecessary weight of traditional aluminum risers.
Screenshot 2026-11-19 at 5.34.15 PM.png
Screenshot 2026-11-19 at 5.14.46 PM.png



AERODINAMICA RACE (2005-2009 Mustang and S650 Mustangs)
DESIGNED FOR THE RACER.

_Q1A3179.jpg

Aerodinamica Race brings BTI’s carbon fiber engineering to purpose-built racing applications. Developed around the APR S650 wing, the Race series currently offers dedicated applications for both the 2005–2009 Mustang and the 2024+ S650.

Although they share the same design philosophy and intended application, each upright has its own engineered geometry and dedicated tooling to accommodate its specific vehicle.
80910502714__D251CD92-5847-445A-935A-37AFEC13A801.jpeg
Constructed using aerospace-grade prepreg carbon fiber, each upright weighs approximately 1.28 lbs, with a complete pair weighing just 2.56 lbs.
0Q3A3330.jpg
For comparison, conventional billet aluminum uprights can weigh approximately 2.87 lbs each. That’s a substantial reduction in weight while delivering the strength and precision required for a performance-oriented wing installation.

Screenshot 2026-11-19 at 5.18.00 PM.png
Aerodinamica Race represents an expanding series of racing-focused applications, with additional Mustang platforms on the horizon.

⸻

ENGINEERED WITH PURPOSE. MANUFACTURED WITH PRIDE.
Aerodinamica represents more than an alternative to factory wing uprights. It represents the belief that there’s always room to improve upon what already exists.
From the original GT4 design to the latest prepreg carbon fiber developments, every generation has been an opportunity to refine, improve, and push the engineering further.


All Aerodinamica products are proudly manufactured in the USA.


Explore the lineup, specifications, and ordering information:



www.btirace.com




BTI | Continued Innovation.
 
Last edited:

Buy TMO Apparel

Buy TMO Apparel
Top