Minimum Brembo to wheel clearence?

[drano38]

I picked up a set of 18x10 American Muscle Cobra Anniversary wheels when they were on sale, for inexpensive track wheels.
http://www.americanmuscle.com/anthracite-10th-18x10-0512.html
I bolted one on the front, and I've got ~.032" from the Brembo brake to inside of the wheel spokes. Is that enough? Don't know how much these things flex (if at all) during cornering, etc.
And I'm about .152" gap from the wheel to the Koni Yellow strut.
Worst case, I could use an MMC 1/8" spacer, but I'd rather not if I don't have to.
Thanks

 

[VoodooBoss]

Brembo and Stoptech want a minimum of 2mm clearance but I'd feel better with 3 or 4.

 

[TMSBOSS]

You are at 1mm. That's tight. A spacer is definitely warranted. Do you have ARP/FRPP studs? 1/8 is not much.

 

[cloud9]

I'd throw some 1/8" spacers on there and not give it another thought Wayne. You can get them from Maximum Motorsports.

 

[wwilde001]

I'd throw some 1/8" spacers on there and not give it another thought Wayne. You can get them from Maximum Motorsports.

+1

 

[drano38]

Thanks guys.
Based on the unanimous vote, I'll pick up a pair of 1/8" MMC spacers from LMR.

 

[WinterSucks]

I might be wrong but I feel like my gap was close to OEM so I did not worry about it. At 1/8" does it make any sense to bother spacing the rears as well (other than looks)?