The Mustang Forum for Track & Racing Enthusiasts
Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.
- Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!
Latest activity
Live updates
TMSBOSS reacted to EF1's post in the thread Super Puzzling Clutch Hydraulics Issue - HELP! with
Like.If it isn’t leaking and is losing hydraulic pressure it would have to be the clutch master cylinder. If the slave was losing pressure it almost has to be a leak. I am not convinced it is losing pressure. Clutch master cylinders can go bad but...-
TMSBOSS reacted to EF1's post in the thread Super Puzzling Clutch Hydraulics Issue - HELP! with Like.Replace the clutch. My 2011 behaved exactly the same after bumping the rev limiter up to 7500. The clutch looked fine. A new clutch and slave cylinder fixed everything.
-
OK. If you're not a Guns and Roses fan here's Paul's version.....
-
I am bumping this thread only because it is May, and this is a useful thread with good reference material.
-
1. Same siht I've been saying for 6 years. 2. Probably not.
Not to sound like your dad but if this is your first time on the 3R or similar be aware that they will have a lot less grip than your old PS4s when cold. You have to get some heat in them. I looped my car on the out lap one time on them at...- stevbd replied to the thread HPDE tires.Not to sound like your dad but if this is your first time on the 3R or similar be aware that they will have a lot less grip than your old PS4s when cold. You have to get some heat in them. I looped my car on the out lap one time on them at... (see full post)
bnight replied to the thread Advice on front tire wear New car.It's also a matter of the right pressures and suspension. If you are not taking good care of your tire pressures during a track day aka checking in/center/out temperatures and making sure your pressures are not rising to the moon by bleeding them... (see full post)
I managed to pick up some Bridgestone Potenza RE71RS in 305/30R19 that I'm going to give a try.-
navbtcret replied to the thread HPDE tires.I will be using some Goodyear F1 Supercar 3R's Memorial Day weekend for the first time on my 2021 GT500. This is my first time running the car at the track without the Michelin PS4's that came stock on the car. I have been running the PS4's for 5... (see full post)
Gunslinger55 replied to the thread Advice on front tire wear New car.Might just try these. Thanks for the suggestion (see full post)-
It's mostly a question of life. If you don't mind bolting them on, Trofeo's are as good as anything. I wouldn't be that concerned with a difference in lap time. OF COURSE the longer wearing tire will be slower. I'm sure there's a tire 3 seconds...
-
The old standby Goodyear SC 3R is right there with the trofeo, Hoosier TA, R7 etc. in most tests, and I believe the 2026 USAA GY discount is 25 percent off. Plus the 3R is a more affordable tire even before the discount. You can get a whole set...
-
Some people are easier on tires than others. Some overdrive, some drive off the rear, some tracks murder certain tires (Gateway Roval is my home track). Yokohama are not tolerant of these things.I suspect that the Pirelli might work well for...
-
This is how my Front A052 looked like after today track day (104 laps on them / 193 track miles and 1933 Street Miles). I did 5 new PBs with them and they still perform reasonably well. I think this tire handle abuse very well.
koharatx reacted to jklapko10's post in the thread Advice Reading Rotors After Runs: Do My Brakes Check Out? with Like.Funny I also snapped a thrust washer at Inde and it led me to getting the GT350 axles so I get rid of them. Driving the car with the dash a christmas tree is doable but not fun (in my case it heavily ramped up the booster so the brake pedal had...-
koharatx replied to the thread Advice Reading Rotors After Runs: Do My Brakes Check Out?.Are the GT350 axles required to remove the thrust washer? I read that people are just removing it, then torquing the axle nut about 200 ft-lbs with red loctite (over the specified 100 ft-lbs + 45 degree arc) and adding a witness mark to keep an... (see full post)
Can report back now after 2 weekends of using the KPM pump at Chuckwalla and COTA, I have ran the car down to 1/8th of a tank and have not gotten any fuel starve-
I managed to pick up some Bridgestone Potenza RE71RS in 305/30R19 that I'm going to give a try.
