The Mustang Forum for Track & Racing Enthusiasts
Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.
- Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!
Latest activity
Live updates
- OX1 reacted to Stan Whitney's post in the thread Who Is Tracking Their S550 GT500? I'm Looking For Someone Fast & Knows The Mods Inside And Out with
Like.Myself and my track buddy have run ours hard for 4 years on track with the normal DCT factory fill level. I checked mine in year 2 to see if it was underfilled from the factory and it was good. GM has so many DCT procedures partly because it... 
Thank you! The 2mm clearance is with Apex 19x11 ET52 and Continental ECF 315/30/19. I first fit them with a 28mm spacer, and running -3.4 camber they seemed really close to the fender so I was worried they would rub under compression while...
bnight reacted to Dave_W's post in the thread Advice on setting up my car for gain confidence with Like.Are you still in touch with your friend that built the 2-way shocks? Google pointed me in the general direction of this defunct Shopify site - www.cerberusgarage.com. Are they adjusting high- or low-speed damping? Did he give you a dyno sheet for...
I've had rubbing and that spacing fixed it.-
bnight replied to the thread Advice on setup for street and track!.They work great for me I need to buy a new OEM set but as I said my dealer have them at 370 which is a big difference than the 70 you have. If they are the same go for it. My rears are gone but overall my car almost don't use the rear brakes. (see full post)
-
No these are the OEM pads, there is a picture of the packaging from Ford on the product page and is the same exact shape as my old pads I had. So yours have the big center gap too? Dealer pricing is also 70 so seems cheap. I'll try these out if...
-
bnight replied to the thread Advice on setting up my car for gain confidence.Based on your parts list looks like you have everything installed but you are lacking one very important component (Endlinks) my car was very annoying because the OEM toe links got soft and there were knocks over bumps etc. I went with Whiteline... (see full post)
-
bnight reacted to Akel's post in the thread Advice on setting up my car for gain confidence with Like.For the LCA this is what I have. https://bmrsuspension.com/product/1574?color=blackForgot to mention that I replaced both rear wheel hubs not to long ago along with the Steeda Extended control arms( I had them already and they went bad) Front...
There are numerous better choices, both in price and performance than the ancient Schitto NT-01s --- whoops , sorry but that slipped out.You might add Yokohama A052s and BFG Rival S 1.5s.-
brand model 295 305 price UTQGBridgestone Potenza RE-71RS30 sq 2000 200Bridgestone Potenza RE-71RZ30 sq 2140 200Contenintal ExtremeContact Force 30 sq1700 200Falken Azenis RT660+ 35 sq 30 sq 1800 200Goodyear Eagle F1...
-
🤔The host of this thread, bossdog, seems to have disappeared on us last December.We should probably try to keep this chart updated for others as a reference and maybe expand the sizes from 295 and 305 to include 315.
- JAJ replied to the thread Minimum Tire to Strut Clearance.I've had rubbing and that spacing fixed it. (see full post)
- TeeLew replied to the thread Advice on setting up my car for gain confidence.Quality coil-overs have the potential to be much better than the stock-type damper because they have a better internal architecture. The problem is that sometimes the people valving them don't have the faintest clue what they're doing. Also... (see full post)
- TeeLew reacted to Akel's post in the thread Advice on setting up my car for gain confidence with Like.Got it! I was just trying to translate it into clicks when you mentioned the percentages. I believe it is a needle/seat adjuster.The rear has been upgraded pretty well. I have the solid Spherical bearing from BMR and the Ford performance...
- TeeLew reacted to Akel's post in the thread Advice on setting up my car for gain confidence with Like.For the LCA this is what I have. https://bmrsuspension.com/product/1574?color=blackForgot to mention that I replaced both rear wheel hubs not to long ago along with the Steeda Extended control arms( I had them already and they went bad) Front...
That looks really good!
Mike_FL reacted to Skidmarc's post in the thread What did you do to your Boss 302 or S197 today? with Like.I pulled my front bumper yesterday and installed a tow hook and while I was in there cleaned about a cup of dead lovebugs out of my radiator.
Ludachris replied to the thread Any Cooks Onboard?.That looks really good! (see full post)-
Yummy !! I like your take on the brats, haven’t seen that style !! Up here in Wisco, just grilled brats, onions, mustard on a Sheboygan hard roll is the standard here. They never disappoint for sure no matter how you serve them up.
21GT500 reacted to OPMustang Tim's post in the thread OP MUSTANG Memorial Day Sale 12% OFF Site Wide 5-23 to 5-31 with Like.
TMO Vendor Posts
OP MUSTANG Memorial Day Sale 12% OFF Site Wide 5-23 to 5-31- Latest: OPMustang Tim
