Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!
You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
I was speaking about forces, not clicks when saying 25/75%. There are several different ways at providing adjustment on a damper. It's tough to know whether your adjuster is a needle/seat adjuster or something that preloads a spring/shim stack...
By filling while on a non-level surface. Since the fill plug is situated at the back, if the car nose is tipped forward you can get more fluid in the case before it dribbles out the fill plug opening. If then opened on a level surface later, the... (see full post)
More than a tire with the 26 offset? No way.All we are doing is moving the wheel out to match the same position as the stock 26 offset, so we can use the 52 offset from the rear wheel ( so we can rotate).I think the leverage would be exactly... (see full post)
This is a great list that I will keep in mind for the future.I would much rather spend my money on consumables and track days at this point before I invest more into a new suspension setup.
Quality coil-overs have the potential to be much better than the stock-type damper because they have a better internal architecture. The problem is that sometimes the people valving them don't have the faintest clue what they're doing. Also...
Justed wanted to update that I've got my aftermarket setup installed. Actual install was pretty easy and straightforward once I got the parts list together. Thanks @navseng for the lead on sweet manufacturing. I assembled a kit from Pitpal - cost...
Randy Pobst on the Yokohama ADVAN Neova AD09, which come in 295/30R19 and 325/30R19, which he claims lasts for a 4000 mile One Lap of America on a 4600 pound Dodge Charger Hellcat Widebody Redeye, 16 track events . . . that is a lot of mileage
Yes. I like them. I have improved my PB at our local track with them, though previously on Falken RT615k+ so maybe not surprising. I can't comment on longevity as I have only had them on for a couple of sessions, but they seem to be holding up...
Easy-Peasy ETrailer has the hitch in stockYah, I put a set of race tier in the mustang with all the tools, and jack for a couple of season but that got old, I'm getting too old for that Rodeo.
I had my first "arrive and Drive" event a few...
I just purchased an open car hauler so I'm trailering my mustang to the track.
I have a C5 with a hitch and built a Harbor Freight trailer tire & Tool trunk trailer. I thought it was pretty cool! The trailer build is documented HERE
Just wanted to post up an update the engine ran good on the dyno. They got the rings seated and did some pulls on race gas it made 610hp and 500tq and it kept getting better. The dyno started to surge so they weren't able to take the motor to 8k...
I have been looking at end links for a while, will put it on my list.My car is stranded right now because my rear brakes got cooked. But as soon as parts come in I will go and test it out. Will try both your suggestions and TeeLew.
Will let you...
I have been looking at end links for a while, will put it on my list.My car is stranded right now because my rear brakes got cooked. But as soon as parts come in I will go and test it out. Will try both your suggestions and TeeLew.
Will let you...