The Mustang Forum for Track & Racing Enthusiasts
Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.
- Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!
Latest activity
Live updates
- galaxy replied to the thread Boss Axle (No) Vent.Not crazy about the can in that Cortex pic. Drains downhill. This axle will vent. It'll work, you just gotta stay up on the checking/draining it. Here's my completely custom pieced together setup on my '12 GT. Now that I know this axle is... (see full post)
-
blacksheep-1 replied to the thread S550 Does more power = more heat?.Well....let's throw some real crap into this fan..lolhttps://www.legendarycollectorcars.com/featured-vehicles/other-feature-cars/smokey-yunicks-hot-vapor-fiero-51-mpg-and-0-60-in-less-than-6-seconds-see-and-hear-it-run-in-our-exclusive-video/ (see full post)
honeybadger replied to the thread Comp Cam limiters or lockout blocks.Do you have a 4.6? I will say my experience is with a 5.2L, which have improved phasers. (see full post)
bnight replied to the thread Advice on setup for street and track!.Speeking of Street/Track spring rates I think there is a reason why so many people go with BMR Handling Springs (because the rates are just about perfect) 300/980 lbs springs. The other options I would consider is Eibach Pro-Kit Progressive... (see full post)- cjatrains replied to the thread Advice on setup for street and track!.So a quick reply to some of your questions:I used an inexpensive 4 1/2" Angle grinder (Harbor Freight House brand), bought there 4.5" x 060 (1/16") cut off wheels. I clamped the spring horizontally to a work bench sending a 2 x 3 or 2 x 4... (see full post)
-
- stevbd replied to the thread S550 Heel-toe struggles.Nice driving. How do you adjust the timing and size of the blip with these aftermarket auto-blip devices? Is that what the knobs are for? Can the system automatically tell when you need a big versus small blip, depending on gear and rpm? (see full post)
67GTA replied to the thread Boss Axle (No) Vent.Another note on this - I’m using the port circled in red on the watts link cover in lieu of the one on top. Cortex v1 cover didn’t have the top vent port, which was the location on the stock Boss cover that was tough to get low enough to not... (see full post)-
-
67GTA replied to the thread Boss Axle (No) Vent.Here’s a screenshot of the configuration. The order number is on there too, so Brendan may be able to replicate from their records as well.I won’t be around the car for a couple weeks, but will try and get a some reference pics in early July. (see full post)
-
Mjschneidy replied to the thread Advice on setup for street and track!.Thanks guys for sharing the knowledge, you've short cut my next steps to sorting out my M1 HP. Was in the process of looking at linear rate springs both production offerings and aftermarket.Purpose for our car is exactly the same, make it a... (see full post)
flyboy55 replied to the thread Comp Cam limiters or lockout blocks.I get the premise of timing the advance or retard for different power. But, I chose the 127500s for my new rebuild. I believe with the lift and duration numbers, Comp says to use limiter. I thought I read somewhere that the Ford Performance... (see full post)
steveespo replied to the thread S550 Heel-toe struggles.Are they as good as the DarkHorse or DHR? No. But are they good and better than me twisting my right leg and ankle around while braking for Turn 7 at Sebring. Yes very much so. And if you watch the video you see me trick the system in Turn 10... (see full post)
Mike_FL replied to the thread S550 Heel-toe struggles.The Autoblip is one of my favorite modifications on my S197. I did think about getting the Xineering blip module and they are based a couple of miles away and could have installed it but I decided against it. The need for an android phone or... (see full post)-
honeybadger replied to the thread Comp Cam limiters or lockout blocks.this echos my experience. To actually make the most power, you need to otpimize all of the pieces...have to get the right cam profile and the right cam timing dialed in with the tune....and that can mean adjusting the came timing a few times... (see full post)
302BOB replied to the thread Bob's Ton of Posts!.Today's Cryptoquote............. "If you want to fly, you have to give up the things that weigh you down."____________Tomi Morrison (see full post)
Bedouin replied to the thread S550 Heel-toe struggles...and it’s an invaluable skill if you’re driving a manual car/truck down an icy mountain pass & can’t break traction with a mismatched downshift. (see full post)- stevbd replied to the thread S550 Heel-toe struggles.Fair points but are the aftermarket modules really as seamless and dialed in as the modern oem auto blip features? I don’t have any personal experience but how do the modules know when you want a big blip versus a small brush of the gas etc? I... (see full post)
mavisky replied to the thread S550 mavisky's "LOUDCAR".It scrapes the parking lot all the time, it's not the flattest parking lot ever built. We run down at the Echo Park Speedway parking lot (formerly Atlanta Speedway) on the south side of town. Unfortunately this is the only area we have to race... (see full post)-
-
67GTA replied to the thread Boss Axle (No) Vent.I’ve been running the Bob’s kit since 2019. For such a simple concept, it took some trial and error to get it dialed in. The only physical mod I made to eliminate any contact with the axle was to open up the half-moon shaped cut on the one... (see full post)
-
steveespo replied to the thread S550 Heel-toe struggles.When you watch Cayman GT4 and 991GT3s walk away on the ups and downshifts, you can understand the need to put the pride away and use the available tech to compete. All the props for those who can do the "heel/toe dance". But I will say this... (see full post)
S550AZ replied to the thread S197 2011 RTR #041.@Bill Pemberton I am trying out the new Firestone Firehawk Indy 500 V2 by Bridgestone. My tire guy said a few guys have started running them on their street cars and the tires are holding up. For the track, they get a little greasy when they get... (see full post)
