Norm Peterson
Corner Barstool Sitter
If it's only rubbing on the 'bulged' portion with the tiedown hole in it, you can remove that part while still leaving the flat bottom metal in place for the bump stop to contact as necessary.Just going to bring this back up.
Boss 302, P springs,305/30/19 PS4,ET 52 Apex 19x11.
I use a 20mm front spacer and no rear.
Front fits great, rear is a slight problem though as the rim protector
on the PS4 contacts the bump stop bracket at full droop.
Not extremely hard but touching.This is with the rear centered at ride ht.
Norm