- Thread starter
- #41
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
And I still have one available.
Sent you a PMSweet, I will take it. paypal?
Would you be able to make one for a mishimoto 25 row cooler?Going to have one of these available after this weekend. And FYI, I can drill the mounting holes to fit other brand coolers as long as the width of the cooler isn't any wider than the mount.
Send me a link to the cooler in question and I will take a look.Would you be able to make one for a mishimoto 25 row cooler?
Looks similar to setrab cooler mounting. You would have to mount it with inlet and outlet facing down. I had mounted mine that way in the boss and ran the cooler lines out the passenger side of the radiator. Send me a conversation with cooler tab dimensions.Universal 25-Row Oil Cooler
Every street or track vehicle demands a reliable and efficient cooling system. High oil temperatures accelerate oil degradation and can result in increased engine wear and potential failure of internal components. The Mishimoto universal 25 row oil cooler is the perfect upgrade for extending...www.mishimoto.com
I think it’s that one. I have it in my shed, so I can take any measurements you need. Also, is there a way to make it mount sideways? With the outlets facing the sides? My lines ideally would run towards the passenger side
Sending you a PM
Sent you a pm06mach1, I'd like to purchase an Oil Cooler Bracket when you have one available.
Sent you a PM.@06mach1 id like to purchase one of your brackets