- Thread starter
- #21
Just to add a couple more pictures for the seat bracket and harness bracket. Seat bracket fit perfectly where the OEM seat mounted to, came with predrilled holes to set the seat forwards and backwards and the slots on the side of the bracket helped position it, a nice arc so tilt can be changed without drilling new holes. The hardest part was marking where to drill the interior side holes in the seat with the center console being there, a good pick tool could scribe it without any issue though. Definitely something you need to have a friend over to help with, and make sure you leave the bottom cushion for the seat in, I pulled it to get it out of the way but added it back when I remembered it had a couple inches of foam in it. You can kind of see the sub-belt bar across the back which has two holes for 5 or 6 point harnesses and is actually steel unlike the aluminum the rest of the bracket is.
Then the bolt that replaced the stud in the second image, I think it was an M12x1.75 but I know for certain the threads into the body were different than the exposed stud for the original seat nut, I went fender washer along with a lock washer and of course paint marks for everything!
Then the bolt that replaced the stud in the second image, I think it was an M12x1.75 but I know for certain the threads into the body were different than the exposed stud for the original seat nut, I went fender washer along with a lock washer and of course paint marks for everything!