Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!
You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Would agree with the ford Performance setup as I have helped several friends get them and they had great results. But, have to disagree about having to spend more the $5K. Down here we have two S197 cars with the basic Cortex koni coilovers and...
Installed a MGW shifter over the weekend. Really happy with how it feels, I was losing seconds a lap with the old shifter feeling so vague.
I realize all the modifications I’m doing aren’t anything ground breaking but it’s a tried and tested...
Got #56 on track at Rockingham last weekend with Track Club USA and the SCMC guys. Drove down to Wilmington from WV on Friday to be tuned then off to the Rock for seven sessions Saturday and Sunday then 3 hours home to WV. She aint a full track...
Just finished up a fresh round of mods. Torsen diff w/ 3.73 gears. Whiteline rear UCA and swaybar. C2Aero side and rear splitters. Autometer dash pod with Boost (incoming), Wideband and Oil Press gauges. Need to dial in the alignment but pretty...
@ShifterX agree with @EF1, every CC plate I've seen includes the spring perch and bearing as part of the assembly. Yes, the size of those elements will vary depending on the spring and shock you are using. Your new CC plate is the upper strut... (see full post)
Neither. You definitely want adjustable camber plates. In terms of ROI on track, CC plates >> adjustable dampers or spring heights, imo. (see full post)
You may want to double check this, as a lot of clubs make an exception for the 4-point Schroth QuickFit system as it has anti-submarining tech built in. It's designed to work with the stock interior and factory Recaros and you don't need a... (see full post)
I’m not sure where to post this but figured this would be as good as anyplace on the site. Back on Sept 25th my GT350R was at a local Ford Dealer awaiting some transmission work to be completed. Well, that never happened as the car was stolen...
Just posting for anyone curious about club spec and searching. I built one and took it to VIR for the TT national tour. The car is a ton of fun to drive and very friendly. We got our time cut pretty short because of incidents with all the rain on...
Day in the Shop - 14.03.2024So after last weekend track test I decided to visit my tire shop and install the A052 tires. It was a miserable rainy day and it took me 2 hours to get to the shop was planning to also install the brakes cooling but...
I have the basic Cortex Koni coilovers. I like the overall quality, offset front struts, easily adjustable spring rates, height adjustability of course, and the true rear coilover location. I didn't like the camber plates they used (I think... (see full post)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.