Auto to manual shift changer 11-14

[Firefighter46]

Getting down to the last bits for my Coyote swap into my 13' base and I'm elbow deep into the shifter. Looks like there's a difference between my 13' auto console and my 14' manual donor boot.
I have the 14' manual shifter boot, but I'll be damned if I can figure out how to make it work with my auto console. I'm missing a plate of some sort. Looks like #3 in the pic....
I know the console tops are the same, and I have a manual "pleather" boot, but it just will not mate up. I have the plastic/chrome rectangular trim ring for the auto, but I'm guessing that's going away. Any ideas what #3 is and do I need it, which I think I do. Did the manuals have a chrome trim ring around the shifter opening on the console??
Help, I'm hoping to fire this rig next weekend, bleeding the clutch now.
Thank you

 

[mwjscn]

You need the manual version of the chrome trim surround. Pictured below is the underside. It has additional tabs present that retain the boot.

 

[Firefighter46]

Is it available by itself?
Every part breakdown I've seen is very vague or doesn't differentiate between manual and auto.

 

[mwjscn]

Not to my knowledge, but you can find used donors on eBay and in junkyards.