Replacing both lower control arms. I know technically there is not control arm alignment adjustment, but the rear mounting bracket has plenty of play. I will get an alignment, but would like to start at the best place.
If I pull the rear bracket out, it will add positive caster.
Looking at the arc angle of the control arm, it appears if I push the rear bracket in, I will loose positive caster but gain some negative camber.
What direction do you recommend as a starting place?
I have steeds camber plates up top.
thanks!
If I pull the rear bracket out, it will add positive caster.
Looking at the arc angle of the control arm, it appears if I push the rear bracket in, I will loose positive caster but gain some negative camber.
What direction do you recommend as a starting place?
I have steeds camber plates up top.
thanks!