The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

S 197 Mustang Parts For Sale

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

AJ has been sorting through the shop and has organized some S197 Race car parts for sale...

1. Battery harness to relocate battery to trunk. used. Very good condition $325

2. Tiger racing Carbon Fiber Hood. Repaired. In Primer $1200

3.New Tiger Racing Carbon Fiber Doors. Still in crate $1900 SOLD

4. New Tiger Racing Carbon Fiber trunklid Still in crate. 900

5. Brembo Front Brake 15 inch system. Used Calipers, hats and rotors. $3250 with hawk pads SOLD
Takes 1 inch thick pads.

6. Optic Armor Windshield. 1/4 inch thick. with defroster. Used Good condition $350 SOLD

7. Optic armor rear backlite. 1/8 inch thick. $300 SOLD

8. G stream rear wing, end plates and mounts. Mounts have slight bend. wing partially separated on
leading edge, but repairable. $750

9. 275 X 18 Hoosier A7 scrubs. Very good condition. $125 each plus shipping
24 available

10. 315 X 18 Hoosier A7 scrubs Very Good condition. $175 per tire plus shipping SOLD

12. Rear quarter panels, new. $ 750 SOLD

13. NEW Brembo 15 inch Front Brake system. Calipers, brackets, rotors, bells. $5890

14. AST Double adjustable shocks with remote reservoirs. $1450 SOLD

[email protected]
Last edited:
Do you know by the weight savings for the 3 carbon fiber body parts? Hood, doors, lid?

The savings are substantial, but dependon where you are starting from.

From stock parts that have not been touched it is 30 pounds for each door, 25 for the hood and 20 for trunklid. These are all approximate,


Because racecar.
Arizona, USA
There is nothing prohibiting the use of Lexan, etc to replace the glass. Minimum thickness is not specified. 1/4" or 3/16" should be OK for the front, rear doesn't matter. Bracing will likely be required to prevent deflection at-speed.

TMO Supporting Vendors

Latest posts

Buy TMO Apparel

Buy TMO Apparel

TMO Vendor Posts