The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

S550 harness mount bracket for lap sub belts black (1 only)

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

steveespo

Lord knows I'm a Voodoo Child
Moderator
4,019
1,967
Exp. Type
W2W Racing
Exp. Level
10-20 Years
Cookeville TN
I have a new never used lap belt/sub belt bracket by 06mach1 in black powder coat finish. allows the use of 5-6 point harnesses providing anchor points for the lap and sub belts on factor Recaro seats. Bolts down using rear seat floor pan bolts Sub belts pass through gap between seat back and bottom and you sit on the straps. Asking $115 shipped
SteveHarness mount 2.JPGHarness mount 11.JPG
 

steveespo

Lord knows I'm a Voodoo Child
Moderator
4,019
1,967
Exp. Type
W2W Racing
Exp. Level
10-20 Years
Cookeville TN
is that comfortable to sit on? is there any problem cutting a sub slot in the seat?
Alex you can't cut the Recaros for a variety of reasons not the least of which is cost. I ran sitting on the belts for a year in my 2011 before going to a full race seat, you don't even feel them. The belts pass between the seat back/base joint where the seat reclines. This is actually an approved SCCA method for club racers.
 
Can you help me understand why cutting a sub slot in the recaros is not possible for the drivers seat.

Is it a lack of fixed back? Some manufacturers like cobra make reclining seats with sub belts.

Please help me understand
 
2,203
1,067
Bay Area
Can you help me understand why cutting a sub slot in the recaros is not possible for the drivers seat.

Is it a lack of fixed back? Some manufacturers like cobra make reclining seats with sub belts.

Please help me understand


Its possible to do that but why would you want to cut a hole in a perfectly good seat. The Harness runs through the seat and you dont feel the belts while sitting on them. If you cut a hole in your seat you incur the cost of having someone repair what you did. Then you have to to into account what the belts could possibly hit or rub against under the seat, IE, any connectors or fittings.
 
I have a new never used lap belt/sub belt bracket by 06mach1 in black powder coat finish. allows the use of 5-6 point harnesses providing anchor points for the lap and sub belts on factor Recaro seats. Bolts down using rear seat floor pan bolts Sub belts pass through gap between seat back and bottom and you sit on the straps. Asking $115 shipped
SteveView attachment 11109View attachment 11110
is this still for sale?
 

TMO Supporting Vendors

Top