The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Tire & wheel combo for track

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Any one running Hoosier 295/30x18 and 275/35x18 on the track? If so do they work well?
I'm thinking of running these on Enkei PF01s 18x10.5 and 18x9.5.
 
Forgeline is coming out with a 1 piece mono block wheel in 19's with the correct offset for the Boss .I plan on running Hoosiers on them.I did run Hoosiers on the stock rims and they where great!
 
What size DOT slicks can i use for 1/4 mile. I have seen a vido with a boss with 15'' M/T but could not see the size. Thanks
 

TMO Supporting Vendors

Top