Finally getting parts put on my car and a couple things I haven't done before. I have Baer hubs with screw in 1/2 - 20 ARP 3in wheel studs. I have no idea how to torque down the studs to 100lbs. Meaning I can't secure them enough to get them torqued. Tried securing with a vise but don't want to marr them up and they still move if I use wood blocks to secure.
Anyway. I was thinking I can and putting them on the car and torque them when a wheel is on and on the ground to keep the wheel from spinning. Just have 4 nuts on, torque the one without and rotate. But I don''t know if I'll have good access from behind. How are guys torquing them?
Anyway. I was thinking I can and putting them on the car and torque them when a wheel is on and on the ground to keep the wheel from spinning. Just have 4 nuts on, torque the one without and rotate. But I don''t know if I'll have good access from behind. How are guys torquing them?
Last edited: