This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I thought about running the decal to the door edge or tie it into a Race Louvers ventPersonal opinion, just run it to the door edge. The tapered trailing edge gives it some character. You would run into the 5.0 badge on the stock guard. Without the 350 vent the straight leading edge has nothing to line up with and if you curved it to match the wheel arch the trailing edge would be weird.
I suppose it would really depend on what you did to the rest of the car. @mavisky car looks absolutely MINT because of the total theme all over the car as opposed to just a single element.
View attachment 95335
View attachment 95332View attachment 95334
Definitely tie it in to the louvers.I thought about running the decal to the door edge or tie it into a Race Louvers vent
View attachment 95336
The only problem though is that the Race Louvers vent has horizontal lines while the GT4 decal has an upward angled bottom edge to follow the lines of the car. Not sure how that'd turn out as a pair. Would be a sharp point where the two bottom edges meet. I suppose I could make a custom decal that curves straight into the Race Louvers vent....assuming I can install the vent perfectly straight.
Agreed, if you're wanting to purchase a solution from someone I'd trust Dave to knock it out for you. I'm just one of those "I'd rather do all the work myself even if the result is 90% of what it could be at best" type of people.DaveW has been doing racing decals for 25 years plus, so he do know what he be doing and there are a zillion SCCA and NASA drivers who swear by his company , Solo Performance.