This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
HackBoss302 said:Payment sent, Thanks Peter!
Shawn,unrealford said:I have a question about the Steeda Boss springs.
I'm about to install them but was wondering if I'll need a Panhard bar with these, and do I have to cut them bumps stops?
Thanks, figured I'd use a pre existing post. If it's a problem I'll start a new thread.
Shawn
Thank you very much. Sucks about the Panhard bar.mardis said:Shawn,
I have the Boss specific Steeda springs on our '13 and yes, you will need an adjustable Panhard bar. The rear in our car shifted between 3/8"-1/2" to the drivers side.
And no, the bump stops did not need to be trimmed. I have seen others resort to replacing their bump stops with shorter ones though.
I hope this helps.