Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!
You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Just wanted to post up an update the engine ran good on the dyno. They got the rings seated and did some pulls on race gas it made 610hp and 500tq and it kept getting better. The dyno started to surge so they weren't able to take the motor to 8k...
I have been looking at end links for a while, will put it on my list.My car is stranded right now because my rear brakes got cooked. But as soon as parts come in I will go and test it out. Will try both your suggestions and TeeLew.
Will let you...
I have been looking at end links for a while, will put it on my list.My car is stranded right now because my rear brakes got cooked. But as soon as parts come in I will go and test it out. Will try both your suggestions and TeeLew.
Will let you...
I believe SR Performance is American Muscle's in-house private label Chinese garbage shocks. As Nancy Reagan said, Just Say No.Koni Sport (aka Yellow) shocks are good for the price. When adjusting, don't leave them at the end of the range or...
No, you do not need spacers until you move up to 19 x 11" Apex. That is why I chose this set up. You are limited to 295 30 19. The car would be faster with more tire, but I am not racing, just having fun. (see full post)
Easy-Peasy ETrailer has the hitch in stockYah, I put a set of race tier in the mustang with all the tools, and jack for a couple of season but that got old, I'm getting too old for that Rodeo.
I had my first "arrive and Drive" event a few... (see full post)
I just purchased an open car hauler so I'm trailering my mustang to the track.
I have a C5 with a hitch and built a Harbor Freight trailer tire & Tool trunk trailer. I thought it was pretty cool! The trailer build is documented HERE (see full post)
This setup has run on 3 of our local TX cars with good success. It's similar to what Middleton does. Its a good start that calms down the chassis motions, has good grip and is fun and controllable with the power.Steeda dual rate springs...
Myself and my track buddy have run ours hard for 4 years on track with the normal DCT factory fill level. I checked mine in year 2 to see if it was underfilled from the factory and it was good. GM has so many DCT procedures partly because it...
I have been looking at end links for a while, will put it on my list.My car is stranded right now because my rear brakes got cooked. But as soon as parts come in I will go and test it out. Will try both your suggestions and TeeLew.
Will let you... (see full post)
Based on your parts list looks like you have everything installed but you are lacking one very important component (Endlinks) my car was very annoying because the OEM toe links got soft and there were knocks over bumps etc. I went with Whiteline...
Quality coil-overs have the potential to be much better than the stock-type damper because they have a better internal architecture. The problem is that sometimes the people valving them don't have the faintest clue what they're doing. Also...
This is a great list that I will keep in mind for the future.I would much rather spend my money on consumables and track days at this point before I invest more into a new suspension setup. (see full post)
The Steeda Extended control arms have poleretan bushings in them at least that's my understanding they are different than stock. If you already had your LCA's done assuming it's Bearings (Uniballs) than that should be enough to tame it. Again I...
Are you still in touch with your friend that built the 2-way shocks? Google pointed me in the general direction of this defunct Shopify site - www.cerberusgarage.com. Are they adjusting high- or low-speed damping? Did he give you a dyno sheet for...
2018 Race Red Mustang GT Premium built as a clone of the 2018 Steeda Q500 HPDE project car.
Steeda coilovers, Steeda adjustable front and rear bars, Steeda IRS bushing supports and braces, Steeda K member brace, 19x11 Apex flow form wheels...
Several guys on GT500 board that have tracked upwards of once a month since new (20/21), and this is the first I've heard of over filling.
Always up for new info, but not overfilling does not seem to have any detriment. (see full post)