This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
captdistraction said:Nice stuff guys. Can someone take a picture of the restraint module? Also, just to be clear, its not the module pictured here?
http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/R~4AAOSw7aBVIz3b/$_57.JPG[/ig]
I believe that module to be the body control module, but I'll admit to not studying wiring diagrams yet.
[/quote]
That thing that is pictured is some BS you don't need.
Hey Chris, as you suspected and mentioned the cam journals are worn and would account for some oil pressure loss. In regards to the engine a freshen up should be all that is required, the engine cleaned up just fine the last time at .010 over so we do not expect any issues there that a simple light hone and re-ring will not take care of. In regards to the new heads, we are happy to install them but we provide no warranty at all on them, as we discussed they are ford rejects that we also had the opportunity to purchase, the majority had defects in the castings such as porous deck surfaces etc. We can install them but again we cannot provide any warranty for them.
As a courtesy we will do the teardown for no charge, the following will be the cost to rebuild /freshen it up:
Hone cylinders $250
Replace all bearings $300
Replace Rings $289
Boss head gaskets $139
Assemble customer heads using supplied plug and dowel kit and other supplied parts $375
Valve job/face old valves to new heads $350
Assemble complete shortblock and longblock $1200
For a total of $2903
If we find anything else that concerns us we will let you know. Let me know if we can proceed when you have a moment.
Modular Mustang Racing
captdistraction said:There's also this: http://parts.autonationfordwhitebearlake.com/ford/mustang/cr3z6009a/2012-year/boss-302-trim/5-0l-v8-gas-engine/engine-cat/engine-scat/?part_name=short-block
On the heads, I'm not sure if a full valve job needs to be done or if just lapping the valves will work. I could always find someone local to handle that however.
captdistraction said:Its like some people either just have the capacity/patience/ability to make diamonds out of horseshit, or just like taking on projects that are in the class of "hopeless".