Finally getting around to assembling my 5.2 build to install in the 21 Car early this season. Starting with all new parts sourced mostly through Capaldi Racing, including Mahle pistons/Manley forged rods with ARP2000 bolts, cross plane 5.2 FP350 crank, predator block, Gen 3 Coyote heads with PAC 1281X valvesprings and Titanium retainers, ARP head studs and damper bolt
. Shortblock was deburred, honed, cleaned, sized, balanced and assembled by Holbrook Racing. All accessories are new such as fasteners, oil pan/pump is GT500, timing kit is Gen 3 new from Ford Performance with Boss 302 primary tensioners, GT500 water pump, ATi Damper and all new sensors, front cover and cam covers. Assembly is going well and here are some pics of the progress, should be ready to swap in about a week as I am waiting on a few specialty tools to install rear seal and the Direct Injector seals.
I haven't made a new post in a while so I thought I would share.
Steve
I haven't made a new post in a while so I thought I would share.
Steve