Wheel/Tire Fitment

[mustang5o]

I have 18x10 SVE Drifts and though I'm sure most know I'll post the details: offest is +43mm and backspacing is 7.2in. I'm wondering if the Nitto NT01 305 35 18s would fit for a square setup? Car is 2013 Boss LS with stock suspension except I do have MM CC plates at max negative camber. I've thought about cutting the end link bolt that point out at the tire if needed.

Thanks

 

[captdistraction]

It should fit but you might want a 1/4" spacer or similar up front to optimize strut to wheel clearance


Sent from my iPhone using Tapatalk Pro

 

[Mad Hatter]

It should fit but you might want a 1/4" spacer or similar up front to optimize strut to wheel clearance


Sent from my iPhone using Tapatalk Pro

I can confirm, My previous set up was 18x10 drifts with P springs and 305/35-18 nittos, fit fine but with out a small spacer they would rub on the brake ducts.

 

[mustang5o]

I can confirm, My previous set up was 18x10 drifts with P springs and 305/35-18 nittos, fit fine but with out a small spacer they would rub on the brake ducts.

Do you recall which size spacer you used? I have 1/8" spacers on hand now. Just need to figure out if I should buy 1/4" spacers.

 

[Mad Hatter]

Yes, was the 1/8th spacer, you should be fine. Oh, that was with -2 camber though

 

[mustang5o]

I have MM CC plates with lots of -camber