► Apex | Flow Formed Lightweight Mustang Wheels - Built to Perform

[Apex Wheels]

What good are track wheels if they don't clear some of the finest brakes out there? Check out Mike's 2014 GT/CS sporting AP Radi-Cal Pro 5000 R brakes behind our 18x11" ET52 EC-7. In conjunction with a 20mm spacer up front to clear the strut, he is left with a TON of space around the caliper.





As always, 18x11" ET52 are in stock and ready to ship anytime!

- Cory

 

[Apex Wheels]

Check out some of the images we captured while attending the SCCA Runoffs at Sonoma this past week. Great racing by Roger, Beau, David, and more in the Spec Mustang Class where our 18x10" ET43 EC-7 is the wheel of choice!









Big thank you and shout out to everyone who relentlessly battle test our wheels in competition use. We appreciate your continued support!

- Cory

 

[Mad Hatter]

Always the sales come before and after I get mine.... Thats life!!

 

[ArizonaBOSS]

Always the sales come before and after I get mine.... Thats life!!

FWIW I have three sets of EC-7s...very helpful when dealing with multiple sets of tires or managing practice/used vs. fresh or wets.

 

[Mad Hatter]

Yup thats where I want to get too... Have a attic full of used semislcks and slicks that would be fine for practice.... That and next year we will racing rain or shine so will need the rims.

 

[Bill Pemberton]

Hmmm...... are the 18x11s going to be on Sale toooooooo? Pardon me if I missed any note , prior, that said, " Yes, Bill , tell your wife to start saving for your Christmas present right now!"

 

[Mad Hatter]

Hmmm...... are the 18x11s going to be on Sale toooooooo? Pardon me if I missed any note , prior, that said, " Yes, Bill , tell your wife to start saving for your Christmas present right now!"

Yes! in silver and anthracite if I saw correctly............... My wife says I already did my own Christmas shopping so dont expect anything more....

 

[Apex Wheels]

Hmmm...... are the 18x11s going to be on Sale toooooooo? Pardon me if I missed any note , prior, that said, " Yes, Bill , tell your wife to start saving for your Christmas present right now!"

Indeed they are Bill! Race Silver and Anthracite as mentioned above: https://www.apexraceparts.com/shop-...stang/18x11-et52-apex-ec-7-mustang-wheel.html

Cory

 

[Bill Pemberton]

Must of missed it while I was taking my nap?!

 

[TMSBOSS]

I’ll need another set by spring. Big Brake time coming soon.

 

[Mad Hatter]

Yes!! its part of the great passage to better brakes!

 

[Apex Wheels]

18x9.5" ET35 back in stock

We are excited to announce the return of our popular 18x9.5" EC-7. All pre-orders have officially shipped out. Plenty of wheels still in stock so order now with zero wait time!

- Cory

 

[Bill Pemberton]

Birthday and Christmas coming up, hope momma took all my extremely subtle hints that I need Wheeeeeeellzzzzzzzzzzzzzz!?

 

[Apex Wheels]

Birthday and Christmas coming up, hope momma took all my extremely subtle hints that I need Wheeeeeeellzzzzzzzzzzzzzz!?

Were you a good boy this year? If so, we've got some deals for you!

- Cory

 

[Bill Pemberton]

I think everyone on TMO has been good this year, since we spend so much time here , getting advice, buying stuff, socializing, etc. that we have no time to really be bad, ha,ha.

18x11s in silver are calling my name!!

I have told a bunch of friends about you guys and I know some have gotten rims from you -- so far you have been good boys , as no complaints from any of my friends!!

 

[Bill Pemberton]

Wow , thanks for the posting , as I have been unable to pull up some of the promotions for these rims ( pretty sure the problem is on our end , as we have been making major changes with our server and other programs). Things seem to go haywire for us a lot more often now that we have 17 Stores and over 1500 employees -- I started when we had 75 folks in the Woodhouse Auto Family, ha.

Anyway , much appreciated as was interested in the 18x11s and know a couple of others , so will drop them a note on the 20% off sale ---huuuuuuugggeee!

 

[TMSBOSS]

Dropped and picked up, Bill. Thanks.

 

[Bill Pemberton]

Way cool Trace!!!!!!

 

[Apex Wheels]

Need some last minute Christmas gifts? Want an excuse to annoy your significant other? Or just love collecting new parts? Many of our EC-7 wheels are still on sale and in stock through the end of the year.

Check out Bryan Kerrick's beautiful racecar on our 18x11" ET52 EC-7's in Race Silver.

 

[Apex Wheels]

Introducing the new APEX SM-10 for Mustang

The new APEX SM-10 wheel for Mustangs combine a straight 10-spoke design with our “I-beam” milling technique to produce a lightweight wheel. The face profile provides unmatched big brake clearance while the new milling feature has increased strength while shedding weight, and it adds a visual feature typically only found on the most expensive race wheels available on the market today.

Visit our website to order

SM-10 Design Features

1. Fit Matters

These concave SM-10 wheels are designed specifically for your Mustang. The SM-10 provides chassis optimized fitments and proper load distribution. If you’re looking for a cost-effective lightweight 19” wheel, this is your answer.

2. Face Profile
All Mustang SM-10 wheels are built with a profile 2 - medium concavity face profile, as that yields optimum results with each of the wheel specifications.

3. “I-Beam” Spokes

The spokes of the SM-10 were designed to be robust where they need to be, and extra lightweight where they should be. Weight is reduced by CNC machining material out from the sides of each spoke. It’s expensive and avoided by almost every manufacturer, but affordable with volume. In each concavity profile of our SM-10 design, the I-beam spokes are carefully evaluated from structural aspects to ensure minimal weight, brake clearance, and remarkable strength.

4. Beefier Lips

By saving weight elsewhere, we’ve added extra material where it counts. We’re beefing up the barrel’s inner lip on the SM-10 to better handle the repetitive abuse seen on the track.

5. Knurled Bead

We’ve upgraded these wheels to include a knurled bead seat to reduce unwanted tire rotation. This added feature will help keep your balance stay truer throughout the life of the tire.

6. Open Center

Unlike the narrow lug recesses of most other wheels, the SM-10 wheel features a wide open hub center that easily accommodates oversized race lugs and beefy impact sockets. This allows for quick and easy wheel changes and prevents chips and scratches from tools.

7. Center Caps

We don't reuse one cap design for all of our wheels. Every SM-10 wheel is designed to work with factory center caps. You can easily replace APEX center caps with OEM S550 Mustang caps for a clean factory look. The SM-10 wheels will ship with our Gloss Black center cap that mimics the size and shape of a Mustang factory center cap.

8. Hub Centric

All APEX wheels are purpose-built for select vehicle applications, and centering rings are never required for any Mustang application. All 5x114.3mm bolt pattern wheels feature a direct-fit, 70.5mm center bore.

9. Brake Clearance

Spoke clearance is only half the problem. The barrel construction on a wheel also needs to be big enough to clear the sides of your caliper and rotor. Many aftermarket wheels that have aesthetic compromises in their design may work with smaller stock brakes, or smaller diameter big brake kits, but the larger kits will pose a major problem. Targeted at the serious performance-minded owner, 19” SM-10 wheels clear up to 15.5” diameter rotors and 6 piston calipers found on the GT350.

10. Wheel Hardware

The SM-10 Mustang wheel can be used with all OEM and aftermarket mounting hardware with a ball seat lug recess. Lug bolts, wheel locks, and stud conversion kits all work perfectly. The SM-10 wheel also accepts wheel spacers without issue. The shallow rear chamfer allows the wheel to remain hub centric even when 5mm flat spacers are used. The chamfer is deep enough to clear the chamfered lip found on some aftermarket spacers that would typically cause improper seating of the wheel and, therefore, wheel vibration.

11. TPMS

TPMS sensors, which monitor tire pressure, are one piece of technology that can't be compromised. All APEX wheels accept OEM and aftermarket equivalent Ford/HUF TPMS sensors, and any standard sized metal or rubber valve stem. Use the chart below to help select the correct TPMS for your vehicle.


Designed For The Performance Enthusiast

Light-weight

Flow-forming allows for a significant reduction in rotational mass by reducing barrel weight. This manufacturing technique allows our wheels to be almost as light as a traditional forged wheel, but without the significant increase in price.

Strength

Track duty requires a wheel that can handle the punishment of high lateral G’s, hitting berms, and every once in a while, a small off-track excursion. Spoke and barrel design are a major factor in wheel strength. The flow-forming technique uses high-pressure disks/rollers to roll the wheel’s barrel into its final shape. This gives the barrel the same strength properties as a forged wheel since monoblock wheels go through a similar step to form their barrels. We design our spoke dimensions to help evenly distribute loads from the barrel to the center of the wheel. The lack of a front lip, and spokes directly connecting to the edge of the wheel, also add increased strength to the outer lip of the wheel.

Chassis-Specific Fitments

Stretched rubber, narrow tires, and fender rubbing are not elements to look for in a competitive wheel/tire setup. All of our wheels were designed with offsets that allow for proper fitment of extreme summer, and r-compound tires without the need for spacers or fender rolling. This means keeping the tire under the fender, and away from suspension components. Track oriented wheel widths are also important as they provide proper sidewall support under hard cornering. Too much rubber for a wheel results in excessive sidewall deflection, which translates into sloppy and delayed turning response.


The APEX Standard



1. Testing & Certifications

Computer simulated stress tests are no match for real-world testing when designing a lightweight wheel that will see extreme loads. All APEX wheels are crush and load tested to exceed JWL standards and those results are independently tested and certified in Japan by the 3rd party government agency known as the VIA. Countless wheel companies falsely claim they are tested and certified by the VIA, and so they lack the certificates to prove it. We test and certify each and every design, diameter, width, and offset, separately.

2. Always Flow Formed

All APEX wheels, including the SM-10 wheel, are produced using the Flow-Forming technique. This process significantly reduces weight in the barrel, which has the greatest impact on rotational mass. During the manufacturing process, rollers apply high pressure to the inner barrel, compressing the aluminum into its final shape. This effectively eliminates porosity and aligns the grain structure of the metal, which increases tensile strength. The end result of the Flow-Forming process is a lightweight and extremely strong barrel that equals that of a traditional forged wheel at a fraction of the cost.

3. Weight & Strength Optimization

We didn’t just redrill and recycle our BMW 5x120 SM-10 design, we’ve rebirthed it. After seven months of Mustang-specific optimizations, we’ve minimized weight while maximizing strength. Strength tested to surpass the 5x114.3 JWL/VIA’s standard, and enthusiast tested to beat their weight standard. Since most Porsches have an inherent rear weight bias and run wide rear wheels, we’ve strengthened the inner lips. The result is a lightweight wheel with extra strength in all the right places. Use the SM-10 with confidence on both street and track.

4. Warranty

All APEX wheels are backed by a 2 year structural warranty and a 1 year finish warranty to the original. This warranty guarantees that all APEX wheels will be free from defects in materials, workmanship, and paint finish under normal and reasonable use.


Finishes



Center Caps

Included: Gloss Black
Optional add-ons: Gloss red, Gloss blue


Sizes, Weights & Pricing

• 19x10” ET40 - Profile 2 - 23.15lbs - $474.00
• 19x11” ET26 - Profile 2 - 25.53lbs - $494.00
• 19x11” ET52 - Profile 2 - 23.98lbs - $494.00
• 19x11.5” ET56 - Profile 2 - 24.64lbs - $504.00

Questions about tires, fenders, brakes, spacers, or suspension clearances?

Click here to review our helpful chassis-specific fitment guides.


Face Profiles



On-Car Photos








Tire Mounting & Balancing Service



Popular street and track tires are now available when you order APEX wheels. Add tires with your wheel order and get free tire mounting and balancing by our trusted enthusiast technicians. We use high-end, touchless equipment and inspect every wheel and tire combo thoroughly before they leave our warehouse. With our competitive tire pricing bundled with the savings of free mounting and balancing and convenience, it’s the ultimate wheel & tire package.

*Note: Tires will only ship mounted to the wheels in your order, and can not be sold separately. Tires and wheels must be purchased in the same transaction. Tire-only orders will be canceled and refunded.

Available Tire Brands:

• Michelin Pilot Sport 4S

Ordering & Contact Information

• Web: www.apexraceparts.com
• Phone: (888) 499-9135
• Email: [email protected]
• Fitment Recommendation: Click here
• Hours: Monday - Friday, 9AM to 5PM PST
• Shipping: All orders are shipped directly from us via UPS.