This is the Build Thread for 2004 NASA CMC MUSTANG. Reply below.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I'm gonna have to stick with the stock 4 link for another season I believe. I'm going to do a Panhard bar and I was planning on ditching the tubular uppers and putting the stock ones back in- MM's site says they twist which helps with rear roll compliance. They're all on rubber bushings now. Do you suggest stock (U shaped) uppers with rubber bushings and rod ends on all four lower connection points?not coilovers. Just stock mounting SINGLE adj struts and shocks from AST. The kit used to be discounted for cmc racers but the company was sold to someone else so AST has diff people running the show now. My springs are almost the same as the 01 Bullitt. 750pd front linear. H&R sport progressives in rear. think the rear rate is 275ish? Very soft setup compared to my counterparts and it is very forgiving and works like a dream. I still run the 4 link rear with NO panhard bar. People think you cant run the 4 link competitively but you reall can, you just have to be smart in which control arms/bushings/sphericals you use to keep the torque boxes from binding/ripping.