AN fitting termination

I figure most of the people here have their own method or methods on how to terminate an AN fitting. But if not and you are wanting to know, here is my method.

 

[Scootsmcgreggor]

Perfect timing for my oil cooler install, thank you much!

Since we’re on the topic, which AN hose do people prefer, steel or nylon braid?

 

[1 old racer]

I use nylon in areas that I don't want to stand out or in areas that I need the hose to be as flexible as possible. And stainless in most other areas.

 

[blacksheep-1]

Very well done, I've never used the blue tape as a "guide" I mark it with a Sharpie, but I like your method better.

 

[Norm Peterson]

Very well done, I've never used the blue tape as a "guide" I mark it with a Sharpie, but I like your method better.

Same here.

After watching his video I'd probably reach for a tubing cutter for the tape-scoring step.


Norm